Do you have a question about the HiQ-SOS3 and is the answer not in the manual?
Questions and answers
Summary of Contents for hq telecom HiQ-SOS3
Page 1
SOS Phone User’s Manual Last updated on December 28, 2016 The Ideal Emergency Telephone System for Seniors Support up to 5 wireless pedants that can automatically call up to 10 emergency numbers from a distance of up to 100ft away from the base • Hearing-aid friendly ringer/handset • Large display with blue backlight •...
TABLE OF CONTENT Features ..................................3 What’s in the Box ................................3 Installation ..................................4 Familiarizing with your SOS Phone ..........................5 Operation ..................................5 Menu ..................................5 LCD CONTRAST Setting ............................5 LOCAL AREA CODE Area Setting ..........................5 ENTER TIME/DATE Setting ............................
1 Features SOS phone can be programmed to automatically call up to 10 emergency phone numbers Supports up to 5 Wireless Pedants (2 included) – Trigger emergency calls up to 100 feet away from the base! Includes two (2) waterproof bags – Ideal to use when taking showers or outside! ...
3 Installation Attaching the bracket to the phone Connecting to the power Adapter IMPORTANT: If you do not connect the power adapter or the batteries, you can still make and receive calls, however the LCD display nor the SOS pedants will work. Also, since the SOS phone has non-volatile memory, all the phone numbers stored in the Phonebook or in the incoming and outgoing lists will remain.
4 Familiarizing with your SOS Phone Handset Incoming Call Visual Indicator Handset Volume Adjustment LO = Normal hearing, HI: Add +40bB Ringer volume adjustment In-Use There are three (3) levels of ringer volume: Low, Medium, High When phone is off-hook, the In-use light will be on.
leading 305 digits for you! Again, this is a “nice to have” convenient feature. It’s not required. You can only setup one local area code. To set it up, press MENU, then press the ‘UP’ button 2 times to flash “LOCAL AREA CODE”, then press “OK/DIAL” button to enter into the Area code setting.
(5) Press the “Red” button on a wireless pedant once. If pairing is successful, the LCD display will show “DONE” for 5 seconds. You have up to 2 minutes to pair your pedant with the base while in pairing mode. A maximum of five (5) wireless pedants (or remote controllers) can be paired with a base at the same time.
(4) Press ‘UP’ button again, the LCD display shows "CHECK MESSAGE" (5) Press ‘OK/DIAL’ button, it will play the recorded voice message. You can press the ‘UP’ button to show “DELETE” and then ‘OK/DIAL’ button to remove the current message. 5.9.3 Emergency call number(s) setting (required) SOS Phone supports auto dialing of up to ten (10) emergency/contact telephone numbers, including 911.
6.3 Deleting a phonebook record or ALL records Press ‘BOOK/ESC’ button, and then use the ‘UP’ or ‘DOWN’ buttons to find the phonebook record you want to delete, press the ‘DEL’ button once. The LCD display shows "DELETE?", then press the ‘OK/DIAL’ button to confirm. If you press the ‘DEL’...
You can also dial out the number if pressed when reviewing the incoming/outgoing call or phonebook records 10 UP Button In On-hook status, press UP to enter incoming call list browsing mode, then use the ‘UP’ or ‘DOWN’ buttons to browse the incoming call records.
button on the base for 3 seconds. You can also press the ‘SOS’ red button on the wireless remote control for 3 seconds to stop. The phone continuously issues “Beep” sound for 15 seconds to alert the user that the SOS function is about to start. If you press the ‘SOS’...
16.2 Trigger EMERGENCY sequence calls In On-hook status, press the “SOS” button on the wireless pedant for 3 seconds to start the dialing out of stored emergency number(s) automatically. To order additional pedants, please visit our online store at https://hqtelecom.com 17 Replacing the built-in batteries on the Wireless Pedants (or remote controllers) 17.1 Replacing the built-in batteries on the Wristband pedant This pedant is equipped with two (2) 3V lithium batteries (CR2016 coin-cell).
Page 13
For warranty and service, please visit https://hqtelecom.com V i s i t h t t p s : / / h q t e l e c o m . c o m f o r l a t e s t d o c u m e n t a t i o n & s u p p o r t P a g e...
Need help?
Do you have a question about the HiQ-SOS3 and is the answer not in the manual?
Questions and answers