Troubleshooting - Leotec AQUA User Manual

V. PACKING LIST
1. Speaker * 1
2. USB cable * 1
3. User manual * 1
4. Color box * 1 set
VI. FUNCTION DESCRIPTION
BLUETOOTH OPERATION
6. Turn on the speaker. The indicator light
near you. The indicator light will turn off if no Bluetooth device is detected within 5 minutes.
7. When connected properly, the indicator light
8. Pair the speaker with the desired Bluetooth device.
9. Play/pause as desired by pressing
10. When you want to play music or a movie from another Bluetooth device, disconnect the speaker and restart the
Bluetooth speaker and re-pair.
VII. CHARGING THE SPEAKER
The speaker has a built-in Lithium battery. The battery is rechargeable and provides approx 2.5-hour continuous
operation in 60% volume when fully charged.
Use the micro-USB cable to charge the speaker. The red indicator light will illuminate. The red indicator light will turn
to green when the speaker is fully charged.
VIII. COMPATIBILITY
Device equipped with BLUETOOTH 3.0 or higher version (for details please refer to the relevant agreements,
general specification), such as the iPAD, iPHONE (the second generation and iPHONE with updated iPHONE 3.1
software), iPOD TOUCH, MAC with Bluetooth, and most of smart phone or computer support Bluetooth.
Bluetooth 3.0 including agreements as：A2DP, AVRCP, HFP.
IX. TROUBLESHOOTING
PROBLEM
Failure in connection and
pairing for many times
The sound is small or
distorted
Discontinuous music
The indicator for Bluetooth
mode is not on
Hints: Another trouble, please consult the dealer or an experienced IT technician for help.
and
and

TROUBLESHOOTING

3. Inspect whether the speaker is in the status of searching, or, restart
the machine.
4. The surrounding Bluetooth equipment are plentiful, which causes the
difficulty in searching. So, please close the other Bluetooth equipment.
3. Inspect the volume of the Bluetooth equipment and adjust the volume.
4. The power of battery is insufficient, please charge it.
See whether the effective connection distance of sound is exceeded, or,
whether there is obstacle between the speaker and the Bluetooth
equipment.
3. It indicates that the power of the battery is not sufficient. Please try
again after charging it.
4. Restart the machine.
button will flash by turns to detect Bluetooth enabled devices
button will flash at the same time.