Fig. 3.16 Dismounting Of Pe Board Assy - Epson MX-80 Technical Manual

(7)
Dismounting of PE board assembly
The PE (paper end) board assembly for paper end detection consists of a magnet and a
reed switch. Dismount the PE board assembly as follows,
STEP 1. Unsolder the two lead wires from the PE board assembly. (See Fig. 3.16.)
STEP 2. Unhook the PE lever spring from the outer paper guide. (See Fig. 3.16.)
STEP 3. Remove the PE board assembly.
Outer paper guide
Fig. 3.16 Dismounting of PE Board Assy
REV. A
3-14