Table of Contents
Advertisement
Configuration Guide ─ V3.5
WGS5000
WGS5000 Configuration Guide
Release - 3.5
1 • 91
NoniusSoft, Software e Consultoria para
Phone: +351 220301520
Telecomunicações, S.A.
Fax: +351 220301521
Rua Actor Ferreira da Silva, 100
E-mail: nonius@noniussoftware.com
4200-298 Porto • Portugal
Website: www.noniussoftware.com
Advertisement
Table of Contents
Summary of Contents for Nonius WGS5000
- Page 1 Configuration Guide ─ V3.5 WGS5000 WGS5000 Configuration Guide Release - 3.5 1 • 91 NoniusSoft, Software e Consultoria para Phone: +351 220301520 Telecomunicações, S.A. Fax: +351 220301521 Rua Actor Ferreira da Silva, 100 E-mail: nonius@noniussoftware.com 4200-298 Porto • Portugal Website: www.noniussoftware.com...
- Page 2 Configuration Guide ─ V3.5 WGS5000 LL OF OUR SOLUTIONS CAN BE CHANGED OR ANY NEW FEATURES CAN BE IMPLEMENTED TO FIT SPECIFIC CLIENT REQUIREMENTS OU CAN CONTACT US AT www.noniussoftware.com sales@noniussoftware.com Phone: +351 220301520 Mobile: +351 962095238 Fax: +351 220301521 2 •...
-
Page 3: Table Of Contents
WGHotel........................... 9 2.1.2. WGBizPark ........................9 2.1.3. WGPublic........................10 2.1.4. WGHotspotClusterManager ..................10 2.2. License Modules ....................10 3. Installing the WGS5000 ................... 13 3.1. Front View ....................... 13 3.2. Rear View ........................ 14 3.3. Top View ........................14 3.4. - Page 4 Configuration Guide ─ V3.5 WGS5000 4.5.7. Firewall........................... 29 4.5.8. QoS - Quality of Service Submenu................33 4.6. Link Services Menu ....................34 4.6.1. Link Failover submenu ....................34 4.6.2. Load Balancing ....................... 35 4.7. Network Services Menu ..................36 4.7.1.
- Page 5 4.13. WGPublic Menu ....................75 4.13.1. Authentication Mode Submenu ..................76 4.14. WGBizPark Menu....................77 4.15. WGHotspotManager Menu ................77 5. WGS5000’s Configuration Examples ............78 5.1. WGHotel ........................78 5.1.1. Configuration example ....................78 5.1.2. Project Steps ......................... 78 5.2.
- Page 6 Configuration Guide ─ V3.5 WGS5000 5.4.1. Configuration example ....................84 5.4.2. Project Steps ......................... 84 6. Warranty ....................... 86 7. Licence ........................87 8. Technical Specifications ................... 88 9. Problem Solving ....................89 9.1. Reset to Factory defaults ..................89 Upgrading Software ..................
-
Page 7: About This Guide
WGS5000 – Internet Access Appliance User‟s Guide on CD-ROM Serial Cable (RJ45-DB9) Power Cord Note: If any of the above items are missing, please contact your local Nonius commercial channel partner. 1.1.1. About CD-ROM The CD-Rom contains the following: ... -
Page 8: Documentation Comments
1.2. Documentation Comments Your suggestions are very important to us. They will help us making our documentation more useful to you. Please e-mail comments about this document to Nonius Software at: support@noniussoftware.com Please include the following information when commenting: ... -
Page 9: Introducing The Wirelessgest Product Family
Internet Service Provider. The WGS5000 may be adapted to several markets, depending on its configuration and on the client‟s requirements. The most common markets are the hospitality market (hotels), Estate condos, business (companies and business parks) and places with high volume of people‟s traffic like... -
Page 10: Wgpublic
The WGPublic solution also allows that remote DHCP-enabled Access Points, directly connected to Routers, route the users‟ packets to a remote IP, where the WGS5000 is connected and where the captive portal and AAA server are running. This is the so-called “Layer 3” redirection mechanism [5.2], and is ideal when the remote routers are connected via a VPN to the router connected to the... - Page 11 WGPrintServer - Customer Printing: When this module is enabled, the users will be able to upload PDF files to the WGS5000, using a web interface. There is a link to this web interface in the login page and in the pop-up window that is automatically opened when the user logs in. The uploaded files will be printed in a printer that the hotel may make available to its clients.
- Page 12 WGS5000 Hotspot Manager: this module (which is different from the WGHotspotManager solution) enables a centrally located WGS5000 to gather information from remotely placed WGS5000s. In this way it is possible to consult, in a single, central point, all the statistics from the remote WGS5000s (user sessions, existing vouchers, registered users and so on).
-
Page 13: Installing The Wgs5000
AC Power Adapter Console port Adapter If any of the above items are damaged or missing, contact your Nonius network supplier immediately. 3.1. Front View B A B A B A B A B A B A B A... -
Page 14: Rear View
LED Blink when the port has activity B – Off/Yellow/Orange Off- 10Mbps / Yellow – 100Mbps / Orange – 1Gbps 3.2. Rear View Figure 2: WGS5000 – Rear View 1 – FAN Ventilation fans 2 – Expansion Slot Optional DVB-IP Card 3 –... -
Page 15: Choosing A Suitable Site
3. Water or moisture cannot enter the case of the WGS5000. 4. Airflow is not restricted around the WGS5000 or through the vents in the back of the Switch. Nonius recommends that you provide a minimum of 25 mm (1 in.) clearance. -
Page 16: Wgs5000 Application
Firefox 1,0+) 4.2. Setting Up For Management To open the WGConfig - WGS5000‟s configuration interface, for the first time, connect an Ethernet cable to the “LAN 1” interface (on the right hand from behind), and point your browser to https://169.254.255.10/WGConfig. -
Page 17: Application Pages - General Description
Tip: One of the first things you should do when you login for the first time is to assign a fixed IP address to the WGS5000‟s WAN interface and to connect it to the internal network (this may be the client‟s internal network or your company‟s internal network, if you are testing the equipment). -
Page 18: System Menu
Configuration Guide ─ V3.5 WGS5000 To choose a given menu, just click the option you desire, and the edition/visualization area will change accordingly. In the following chapters, all the WGConfig menus are described. 4.4. System Menu This menu is used for configuring generic system parameters, such as the behaviour of the physical Ethernet, USB and Serial interfaces, the activation or deactivation of NAT and the configuration of the WGManager interface. -
Page 19: Network Base Submenu
This is useful, for example, for communication with PMS (Property Management Systems) systems; Trunk port – use this option if you need to connect the WGS5000 to an 802.1q enabled switch. The options for the USB interfaces are: ... -
Page 20: Wgmanager Submenu
Configuration Guide ─ V3.5 WGS5000 4.4.3. WGManager submenu This submenu allows the configuration of the WGManager interface. Figure 10 - WGManager submenu Business Operation Mode: select the correct value according to your client‟s business profile. The options are (for descriptions please check [2.1]: ... -
Page 21: Network Menu
Configuration Guide ─ V3.5 WGS5000 4.5. Network Menu This menu allows the definition of network addresses, firewall‟s parameters, VLAN configuration, etc. Figure 11: Menu – Network 4.5.1. WAN Interfaces Submenu Network parameters can be configured at following menu: Figure 12: Wan Interface – Primary Wan Configuration Note: There will be as many WAN Interface configuration forms as „WAN Router‟... -
Page 22: Corporate Interface
Protocol: Select Static (for static IP address) or DHCP (for dynamic IP address). Note: If you select DHCP you will not know the IP address provided to the WGS5000, unless you check your DHCP server. However you will be able to access the WGConfig interface through the LAN1 card, opening a browser and typing the https://169.254.255.10/WGConfig... -
Page 23: Virtual Interfaces
WGS5000 or any active equipment connected to this WGS5000‟s physical inteface. Choose WAN or Corporate LAN Access if you wish that the WGS5000 forwards packets to and from these networks. Virtual Interfaces: This text box lists the existing virtual interfaces. -
Page 24: Vlan/Bridge Submenu
Configuration Guide ─ V3.5 WGS5000 Figure 15: Network Menu – Virtual Interfaces In this example, we create a virtual interface over the hotspot LAN physical interface, with the IP address 10.0.0.1 and Netmask 255.255.255.0. If we want that SIP users make phone calls to internet we just have to grant WAN access in SIP server, else SIP will be used just for internal use. - Page 25 AP is using VLAN with VID 4 for management traffic. The switch port that connects to the AP is marked as a member of VID 4. The WGS5000 must have an interface marked as a member of VID 4 and the configuration will be: LAN|4|IP| 192.168.186.1, where the IP address assigned to the VLAN must be in the same range of AP‟s IP address.
-
Page 26: Routing Submenu
Example: if you wish to filter out all MAC addresses that start with 00:02:02 insert 00:02:02:00:00:00/ff:ff:ff:00:00:00. 4.5.5. Routing submenu The routing submenu can be used to add static routes to the WGS5000’s routing table. Figure 18 - Static routing configuration Static Routing: enable this check box for being able to configure static routes Route Name: assign a name to the new route;... -
Page 27: Vpn Ipsec
Pre-shared Secret: common secret used on authentication process. Must be equal in both peers; NAT Traversal: enable this option if the WGS5000 is behind NAT (Network Address Translation); Local ID: if NAT Traversal is enabled, the local ID of each WGS5000 is required and must be different from each other. - Page 28 When the configuration is finished it is necessary to enable IPsec Forwarding to start the negotiation of the VPN tunnel. WGS5000 has a watchdog every 5 minutes to ensure that the VPN tunnel is up. It also detects a dead peer and tries to re-establishes the tunnel.
-
Page 29: Firewall
DNS services, if an internal DNS server is being used. Enable the ICMP reply checkbox for being able to PING the WGS5000 at the chosen interface. It is not possible to enable ICMP replies on the Captive Portal interface due to the Captive Portal‟s nature of capturing all traffic and redirecting to a login page. -
Page 30: Noniussoft, Software E Consultoria Para
Configuration Guide ─ V3.5 WGS5000 Hotspot Port Forwarding Use this form to perform port forwarding for equipments connected to the captive portal interface. Figure 25 - Hotspot Port forwarding Username: Insert the client‟s username or MAC address. Port: Define the communications‟ port. -
Page 31: Noniussoft, Software E Consultoria Para
Configuration Guide ─ V3.5 WGS5000 Figure 26 - Corporate Port forwarding, Hotspot Services Corporate Port Forwarding Use this form to perform port forwarding for equipments connected to other interfaces (physical or virtual), but the captive portal interface. Interface: select the interface (physical or virtual) to which the target equipment is connected. -
Page 32: Noniussoft, Software E Consultoria Para
Configuration Guide ─ V3.5 WGS5000 All services: if enabled, there will be no restriction to any hotspot service, and all the following options will be automatically enabled. Web: if enabled, the hotspot users will be granted HTTP/HTTPS services (TCP ports 80 and 443). -
Page 33: Qos - Quality Of Service Submenu
Max Download Data Rate: Insert the maximum value, in Kbps, for download per WAN Interface. Contention Ratio: Sets the contention ratio that will be performed by WGS5000. Traffic Classifier: If the checkbox “Traffic Classifier” is enabled, the traffic will be classified/prioritized, guaranteeing prioritization between different types of service: High Priority –... -
Page 34: Link Services Menu
“Real-time Rate”, which works as it is described for the first queue, and so on to the others queues. The functioning of the QoS system is only visible when the rate of traffic at the WGS5000‟s input interface is so high that packets tend to become queued at the input buffers. This means that QoS will only improve the system‟s performance in high load scenarios! Otherwise, no improvement will... -
Page 35: Load Balancing
Enables load balancing between two or more WAN connections. It improves the performance of the WGS5000 by balancing the number of connections that each WAN port will have based in its bandwidth capabilities. In this menu it is also possible to add or exclude certain networks that are present in the WGS5000 network from load balancing. -
Page 36: Network Services Menu
Configuration Guide ─ V3.5 WGS5000 4.7. Network Services Menu The services shown in figure are available: Figure 32: Menu – Network Services 4.7.1. Captive Portal Submenu This submenu is not visible in the WGHotspotManager solution. Figure 33: Network Services Menu – Captive Portal Enable: Enables the Captive Portal, which is the tool that performs the redirection to the login page when the user opens up the browser and that works as DHCP server. -
Page 37: Noniussoft, Software E Consultoria Para
Figure 34 - Manual configuration of the captive portal's network Tip: you should be very careful when manually configuring the captive portal network address and mask. A wrongly configured network and mask may cause instability in the WGS5000‟s behaviour. Captive Portal Network: This field is a select box if the Pre-defined Captive Portal Network is enabled. -
Page 38: Noniussoft, Software E Consultoria Para
Secure Login Web Portal: If this option is enabled WGS5000 will use Nonius certificates. Please note that an error message may appear to clients saying that the certificate belongs to an unknown entity. -
Page 39: Dhcp Server
Configuration Guide ─ V3.5 WGS5000 4.7.2. DHCP Server This submenu is visible when there is at least one LAN interface configured as DHCP LAN Port on the Physical Interfaces submenu [4.4.1]. A DHCP Server will be enabled on this port, providing free access to the Internet to the machines connected to this interface. -
Page 40: Vpn Pptp Submenu
This submenu is only visible if the WGPPTP - VPN PPTP Server Windows (25 users) is enabled. This license enables the WGS5000 to work as a VPN PPTP server, allowing users to connect to, for example, the corporate network from remote places. -
Page 41: Dynamic Dns Submenu
(or at any other Dynamic DNS Entity) and submit the URL (for example, entity_name.dyndns.org). Tip #2: For being able to access the WGS5000 via the DynDNS URL, you will need to configure port forwarding of the 443 port in the router that‟s connected to the WGS5000‟s WAN interface. -
Page 42: Radius Server Submenu
Enable: Enable/disable HTTP Transparent. 4.7.7. DNS Server This menu enables DNS acceleration. The WGS5000 caches DNS requests and locally replies to subsequent requests if the answer is already cached. This menu enables the DNS cache. Figure 42: Services Menu – DNS Server Configuration Enable: Enable/disable DNS Server Configuration. -
Page 43: Service Unavailable
This submenu is only visible if the XML 3 Party Interface module is enabled. This feature allows external platforms to invoke the WGS5000 via a Web Services interface. For seeing the list of available Web Services go to: https://<<WGS5000’s_IP_address>>/WebServices. The WSDL file is available at https://WGS5000’s_IP_address/WebServices/index.php?wsdl. -
Page 44: Customization Menu
WGS5000 Notify Internet Service Initiation: Enable this option to send a notification whenever a hotspot user does the first login. The WGS5000 will call a remote WebService when a hotspot user executes its first login. Tip: The Expired Callback feature is dependent on the peer‟s WSDL. Please consult Nonius for checking out if this service will work with your software. -
Page 45: Login
Configuration Guide ─ V3.5 WGS5000 Country: Insert the client‟s country name; Location: Insert the client‟s location (city name). Social Designation: Insert the client‟s social designation; Unit name: Insert the client‟s unit name (if any); Service name: Insert the service name (Wireless Network, for example);... -
Page 46: Noniussoft, Software E Consultoria Para
Configuration Guide ─ V3.5 WGS5000 Login Page Type: there are two options – normal or frames. The normal page is very simple and light and you can only personalize it by uploading a client‟s logo. The frames page divides the login page in two frames. -
Page 47: Submenu - Time Zone
Tip: The currently loaded images are displayed below the respective box. VLAN Frame Website: The WGS5000 can also present to users a different web page, depending on the VLAN that the user is connected to (assuming that more than one VLAN is connected to the Captive Portal). The following form lets you configure the right frame page to be displayed VLAN. -
Page 48: Hotspot Service Submenu
Configuration Guide ─ V3.5 WGS5000 4.8.4. HotSpot Service Submenu Set start and stop hours for the hotspot/Captive Portal service, on weekends and week days. If the Hotspot Service Control is disabled, the hotspot service will always be functional. Figure 52: Customization Menu – Hot Spot Service Hot Spot Service control: Enable/disable Hotspot Service Control. -
Page 49: Wgmanager Users
Configuration Guide ─ V3.5 WGS5000 4.8.5. WGManager Users In this menu you can add, delete or modify the WGManager users. It allows to configure the password, menus and submenus access on a per user basis. Figure 53: Customization Menu – WGManager user menus permissions Username: Username of the WGManager user. -
Page 50: Online Register Submenu
Configuration Guide ─ V3.5 WGS5000 4.8.6. Online Register Submenu This submenu (available only in WGPublic solution), is for configuring the online registration feature. The following picture shows the configuration form. Figure 54: Online Register configuration options Through the Online Register Page Layout form it is possible to change the logo and the background of the online register window. -
Page 51: Noniussoft, Software E Consultoria Para
SMTP TLS: Enable/disable SMTP secure connection (if required). Activation Link Hostname: WGS5000 hostname used for activation. Tip: Usually, the Activation Link Hostname is configured with the default gateway of the Captive Portal, i.e., if the Captive Portal has the network address 192.168.176.0, the default gateway is 192.168.176.1. -
Page 52: Maintenance Menu
Figure 57: Maintenance Menu 4.9.1. Network Devices Submenu If the Network Devices Check is enabled, the WGS5000 periodically checks the status of network devices and sends an e-mail to the configured address if some device is malfunctioning. Email is sent once in a day at 7 AM, local time. -
Page 53: Db Backup Submenu
Backup now: Command to execute backup now. 4.9.3. VPN Submenu OpenVPN is a solution that makes it possible to remotely access the WGS5000 without doing port forwarding in the remote modem/router. Every WGS5000 has an OpenVPN client that connects to a remote OpenVPN server. -
Page 54: Ups Control
WGS5000. 4.9.4. UPS Control When connected to a Phasak UPS, the WGS5000 can program the UPS to cut the power (and consequently restart any equipment connected to the UPS) periodically. Every 2/3 minutes the WGS5000 cancels the restart instruction. If the restart instruction is not cancelled, the UPS will cut the power. -
Page 55: Resource Consumption
WGS5000 4.9.5. Resource Consumption With this feature enabled you can check in WGManager the performance of your WGS5000. It allows you to check available memory, CPU load and available swap. With the help of these charts you can, for example, check if the WGS5000 unit is correctly dimensioned for your network. -
Page 56: System Status Submenu
System Uptime: Shows the system uptime since last reboot or shutdown. WAN Interface: Shows WAN (eth0) interface configuration. Routing Table: Shows the WGS5000‟s routing table. WGFailover Status: Shows the failover Configuration. Active TCP/UDP IP Connections: Shows the active TCP/UDP connections. -
Page 57: Noniussoft, Software E Consultoria Para
Configuration Guide ─ V3.5 WGS5000 Classifier”. You can analyze traffic classes and the amount of bytes that passed for each class. Classes are listed below: High Priority – Management (SSH,HTTPs), TCP Control Real-time - DNS, VoIP, Video Streaming, Audio Streaming ... -
Page 58: System Log Submenu
This submenu shows the WGS5000‟s system logs. Figure 67: Status/Logs Menu – System log 4.10.3. Boot Log Submenu This submenu shows the WGS5000‟s boot process log messages. Figure 68: Status/Logs Menu – Boot log 58 • 91 NoniusSoft, Software e Consultoria para Phone: +351 220301520 Telecomunicações, S.A. -
Page 59: Radius Log
The connectivity test is based on sending and receiving ICMP packets (Ping) to each connected device. If the first packet sent to a given device doesn‟t receive an answer, the WGS5000 will repeat the connectivity test 5 times. Only when the 5 tests fail a „FAILED‟ message is shown on screen. -
Page 60: Wgticket Status Submenu
This submenu is only visible if the WGTicket license is active. In the top of the form you can choose the printer in which you want print the test ticket. The WGS5000 will try to print a test ticket in the selected printer and will report back the printer status. -
Page 61: Wg3Psw Log Submenu
Configuration Guide ─ V3.5 WGS5000 4.10.8. WG3PSW Log Submenu This submenu is only visible if the WG3PSW module is active. It shows WG3PSW‟s log messages. Figure 73: Status/Logs Menu – WG3PSW Log 4.11. Administration Menu Figure 74: Menu – Administration 4.11.1. -
Page 62: Upgrades Submenu
4.11.3. Licenses Management Submenu After receiving your WGS5000 equipment, it will not have any license applied and will be configured with very low operational attributes and without any modules. You can upgrade the WGS200 by inserting a license key in the ‘New License’ form. The status of the license, if any, can be checked in the lower form. -
Page 63: Remote Management Submenu
4.11.4. Remote Management Submenu This submenu limits the system‟s remote access. Remote access to the WGS5000 can be performed through an SSH session or through a safe HTTPS session using the web browser. Depending on where the manager stands in a networking point of view - WAN, LAN or both – the access to the SSH or HTTPS interfaces may be prohibited or allowed. -
Page 64: Upld/Dwnl Sys Files Submenu
Upld/Dwnl Sys Files Submenu This feature allows saving the WGS5000 configuration file and database. By uploading previously saved files, you may instantly have WGS5000 configured exactly the same way as before. Figure 79: Administration Menu – Upld/Dwnl Sys Files ... -
Page 65: Factory Defaults Submenu
Configuration Guide ─ V3.5 WGS5000 Change WGConfig‟s admin account password. Nonius recommends the change of this password because the default password is written in this guide, which is a public guide! 4.11.7. Factory Defaults Submenu Factory Defaults selection will make the system return to default configuration values. You can choose to reset the entire configuration and maintain the WGManager‟s database or to erase both... -
Page 66: Reboot Submenu
Reboot selection will restart the WGS5000. Figure 82: Administration Menu – Reboot 4.11.9. Shutdown Submenu This will perform a graceful shutdown to the WGS5000. Figure 83: Administration Menu – Shutdown 4.11.10. Logout Submenu Logout selection will logoff the management session, user/password will be requested in order to perform new login. -
Page 67: Wan Diagnostics Submenu
WAN Diagnostics Submenu In this submenu the administrator can perform basic network tests to check the connectivity of the WGS5000 with the surrounding network equipments. Figure 84 - Wan Diagnostics submenu Test type: It allows choosing between the ping or traceroute test. -
Page 68: Noniussoft, Software E Consultoria Para
This submenu is only visible if the WG3PFO license is active. The communication with the several front-office systems is done via several protocols, namely the FIAS protocol. The WGS5000‟s implementation of the FIAS protocol is certified by Micros Fidelio. The WGS5000 also has an interface with the NewHotel front-office, using a proprietary protocol. -
Page 69: Noniussoft, Software E Consultoria Para
Configuration Guide ─ V3.5 WGS5000 Print Ticket: If WGTicket is present, a ticket with the login data will be printed if this checkbox is ticked. Posting Method: There are two methods: PS – Posting Simple and PR – Posting Request (the most common is Posting Simple). -
Page 70: Noniussoft, Software E Consultoria Para
Configuration Guide ─ V3.5 WGS5000 the price that costumers have to pay. Activation Period: Use Activation Period for setting the amount of time for the activation fee. The options are: 15, 30 and 60 minutes. Pre-paid access: set to yes if you want that users select the amount of time they are going to buy before using the Internet. -
Page 71: Wg3Psw Configuration Submenu
Configuration Guide ─ V3.5 WGS5000 during the same day, i.e., when a customer has multiple sessions in the same day and a session crosses a period boundary, the price per minute for the session is split and calculated for each of the periods the session crossed. -
Page 72: Noniussoft, Software E Consultoria Para
Room Auto Discovery: enable this feature if you want the WGS5000 to query your switches for the port where a given MAC is coming from. The WGS5000 is then able to identify the user and to perform an automatic login. -
Page 73: Wgticket Configuration Submenu
Enable: Enable/disable WGTicket. Printer Type: Select the printer from the drop-down menu. Supported ticket printers are the Godex-EZ-2Plus, the PRP-080 and the Brother QL-550/560/580N. Please get in touch with Nonius for details on supporting other ticket printers. IP Address: Define the printer‟s IP address. -
Page 74: Press Button And Print Voucher Ticket
Tip: With this mode enabled, only these vouchers can be printed, the WGManager print voucher/tickets options will be disabled. This functionality has only been tested with Brother printer equipment, support for different printers should be confirmed with Nonius. 4.12.4. WGPrintServer Configuration Submenu This submenu is only visible if the WGPrintServer license is active. -
Page 75: Wgpublic Menu
Configuration Guide ─ V3.5 WGS5000 Figure 91: WGS5000 – WGPrintServer configuration Enable: Enable/disable WGPrintServer. Printer Type: Select the printer‟s model. IP Address: Define the printer IP address. Printer Name: Define the printer‟s name. Maximum File Size (Mbytes): Maximum file size of documents to be printed. -
Page 76: Authentication Mode Submenu
Configuration Guide ─ V3.5 WGS5000 4.13.1. Authentication Mode Submenu Figure 93: WGPublic Menu – Authentication Mode Configuration In WGPublic Business Mode there are three user authentication modes: 1. Normal – users register themselves by filling in an online form and have to receive an e- mail with login data. -
Page 77: Wgbizpark Menu
Configuration Guide ─ V3.5 WGS5000 DB user: insert the Oracle DB username; DB password: insert the Oracle DB password; DB Name: insert the Oracle DB name; DB Function: insert the name of the function to be queried for authentication purposes. -
Page 78: Wgs5000'S Configuration Examples
Network Planning The decision was to share the existing ADSL Line between the internal Hotel and customer use. The WGS5000 will be configured to only allow the usage of half of the available bandwidth to the public Internet Service. The Hotel LAN will be protected from any access from the users of the public network. -
Page 79: Noniussoft, Software E Consultoria Para
A Wi-Fi site survey was done to determine the best location of the access points to maximize the coverage range and minimize the number of access points to be installed. WGS5000 Configuration The following parameters were configured at the WGS5000: WAN interface - Static IP in the range of the Hotel LAN;... -
Page 80: Wgpublic
Project Steps Network and Services Planning The hotspot interface of the WGS5000 is connected to a router that is connected, via VPN, to the remote routers where the access points are connected to. The users receive the network configuration information via DHCP. There is a DHCP server in each Access Point and the IP address range provided by each DHCP server is unique (for example, AP1 works in range 192.168.150.0/24,... -
Page 81: Noniussoft, Software E Consultoria Para
Wi-Fi Site Survey A Wi-Fi site-survey should be done by the entity responsible for the installation of the hotspots. WGS5000 Configuration The following parameters were configured at the WGS5000: WAN interface – Static or dynamic IP depending on the access router/bridge;... -
Page 82: Wgbizpark
Configuration Guide ─ V3.5 WGS5000 5.3. WGBizPark A business park intends to provide communication services to the companies it hosts. Each company will have its own internal LAN which will be inaccessible from other companies‟ internal LANs. The companies will also have a VPN service to allow authorized users to access the internal LAN from the outside. -
Page 83: Project Steps
There also must be one access point in each meeting room, allowing the companies to run meetings in those rooms and to keep having access to their internal network. WGS5000 Configuration The following parameters were configured at the WGS5000: WAN interface – Static or dynamic IP depending on the access router/bridge;... -
Page 84: Wghotspotclustermanager
DNS server. It also includes a captive portal that captures the first request from a client and redirects the request to an internal page, where the user is prompted to insert a username and a password. This data is then forwarded to a WGS5000 located in a Central versus... -
Page 85: Noniussoft, Software E Consultoria Para
When a user wants to logout, he or she may click in the logout button or, if he doesn‟t do it, the WGS5000 will log him/her out after a configurable idle period. In this type of configuration, the username and password maybe obtained in several possible ways: 1. -
Page 86: Warranty
Nonius Software provides 2 years of warranty. The WGS5000 has labels on both sides, that if removed will cause the loss of warranty. -
Page 87: Licence
Configuration Guide ─ V3.5 WGS5000 Licence WGS5000 has a valid licence just for the hardware which is inside of red box. If you want to change something inside, first contact Nonius. 87 • 91 NoniusSoft, Software e Consultoria para Phone: +351 220301520 Telecomunicações, S.A. -
Page 88: Technical Specifications
Configuration Guide ─ V3.5 WGS5000 Technical Specifications Physical Dimensions Height: 38mm X width: 330mm X length: 440mm Weight: ~ 5Kg Power Supply Input: 100-240~1A, Line Frequency: 50/60Hz Power consumption 120 Watts Maximum 88 • 91 NoniusSoft, Software e Consultoria para Phone: +351 220301520 Telecomunicações, S.A. -
Page 89: Problem Solving
Connect your computer to the WGS5000‟s serial interface, using programs like HyperTerminal or Putty. The WGS5000 will prompt for a login and password. To make a reset to factory defaults, login as user reset, and the password “ta12jfcp”. Then Type “Yes”. Be aware that this command is not reversible and all configuration and data in WGManager‟s database will be erased too! -
Page 90: Upgrading Software
WGS5000 Upgrading Software If you are a Nonius partner, please login to http://www.noniussoftware.com with the credentials that have been provided to you and download the most recent updates. Please note that you will only find the updates starting from release 3.0.0. If you have an older version of the software (versions 2.0.28 or below) please get in touch with Nonius for more information. -
Page 91: Noniussoft, Software E Consultoria Para Phone: +351 220301520 3
Configuration Guide ─ V3.5 WGS5000 Contacts NoniusSoft S. A. Rua Actor Ferreira da Silva, 100 • 4200-298 Porto • Portugal Phone: +351 22 030 15 20 • Fax: +351 22 030 15 21 Email: support@noniussoftware.com sales@noniussoftware.com Web site: www.noniussoftware.com 91 • 91...