Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Puricom Europe DENVER
Summary of Contents for Puricom Europe DENVER
- Page 1 HOUSEHOLD SOFTENER DENVER RANGE Ownwer’s Manual, Installation and Maintenance...
- Page 2 MAIN SPECIFICATIONS Electronic Timer. Allows to control all parameters Regenerations Delayed or immediate/ programming . Mixing Valve Allows to regulate the residual hardness Integrated by-pass Allows to isolate the system from installation Transformer Outside. Easy tank salt filling Special for Softeners Multilingual Timmer: English / French / Spanish Certified...
-
Page 3: Table Of Contents
5.2 Installation of the system 5.3 Starting up and maintenance 6. INSTALLATION 6.1 Tools and parts needed 6.2 Installation step by step 6.3 Programming Denver 6.4 System programming 7. START-UP 7.1 Hydraulic start-up 7.2 Residual hardness Checking 7.3 Hardness proof 8. -
Page 4: Presentation
1.2 Before starting Your softener DENVER range will provide you and your family the following advantages. Please see the section “Warnings” before installing the softe- ner. -
Page 5: Introduction
VER range, because the water obtained after being treated with the system is absolutely free of encrusted salts. The DENVER softeners equipments will avoid you all kind of In the most part of Europe the hardness is being expressed problems caused by the hardness of the water and will reduce in hydrometric French grades, but there are other measure- a lot the maintance requested by your electronical devices. -
Page 6: Regeneration Of Your System
Conditioned water Water inlet to make the softening process again. In Denver systems the regeneration process starts automati- cally when the systems detects that the exchange capacity is going to finish, the timer incorporated in the system allows to configurate in a different way the starting of the regeneration, please see section 6.3 in order to get more information about... -
Page 7: Regeneration Grade And Capacity
The Normally the denver systems are provided with a program- DENVER systems are designed to provide softened water and... -
Page 8: Technical Specifications
3. Technical specifications ATENTION: The recommended limit of sodium for the The following board gives you an orientation about the increa- water for human consumption is of 200 ppm. Depen- se of the sodium concentration in the treated water as per ding on the sodium concentration and the hardness of feed hardness: the water to be treated the softened water can present... -
Page 9: Unpackaging And Contents Verification
• Resin for the ionic exchange, cationic type, special for sof- tening, provided inside the vessel. • System Denver, made of plastic, with salt capacity for mul- tiple regenerations. • Brine system aspiration protected with plastic funnel. •... -
Page 10: Warnings
The water treatment equipments serie Denver are not intended the growing of plants and vegetables. to be used to produce POTABLE WATER. Their function is to eli- •... -
Page 11: Starting Up And Maintenance
Please install a reducing valve if needed. (A pressure reducing valve may reduce the flow). If Denver installation process must be carried out by qualified your home is equipped with a back flow preventer, you should technical people. -
Page 12: Installation Step By Step
The system should be always installed with the by-pass Ground valve supplied. If desired it can be installed a by-pass with 3 valves. The bypass of Denver systems has several positions. Do not place shims directly under the salt sto- IMPORTANT:... -
Page 13: Programming Denver
SOLDERED COPPER timer is equipped in the upper part of the cabinet. Denver timers supply a lot of information about the operation Thoroughly clean and apply solder flux to all joints. of the system.Moreover it allows to adjust all the internal para- Make all solder connections. -
Page 14: System Programming
6.4 Start-up programming Mixed regeneration (MR) Similar to delayed regeneration but it allows to program a máximum period of time between rege- Denver softeners are configured to work with delayed regene- nerations. rations (02.00 am). Mixed regenerations are recommended. If you want... - Page 15 6. Installation VOLUME: CHECKING MENU: Amount of water that can be treated by the system. By pressing “UP” y “DOWN” keys simultaneously when the THIS IS THE PARAMETER THAT SHOULD BE PROGRAM- system is working the display shows additional information of MED INTO THE SYSTEM.
-
Page 16: Start-Up
The timer will be placed in service position, if it is not like this, revise the section 6.3 of Denver timer. The softener will start to suction water from the tank (bri- Press “REGEN” key during three seconds to start a regene- ning position). -
Page 17: Residual Hardness Checking
As stated out in section 2.7. it is recommended not to supply completely softened water to household installations. Denver systems have a residual hardness regulator that allows to adjust the hardness quantity in the treated water. This works making a small test of non treated water with a completely softened water. -
Page 18: Maintenance/Sanitizing
Then push the broom handle The Denver softeners, being automatic, do not require a com- straight down into the salt. If you find a hard object, it is most plex maintenance. - Page 19 8. Maintenance / Sanitizing Make sure that the bypass valves are working. The disinfenction process will be done when the regenera- tion finishes and the disinfection solution has been extruded from the softener to the drain. REMOVING INSCRUSTATION: Once a year it is recommended to make a cleaning with Clean Softener (611000), a product specially designed for the cleaning of your softening system.
-
Page 20: Identification Guide And Problems Resolution
9. Troubleshooting guide 9. TROUBLESHOOTING GUIDE PROBLEM SOLUTION 1. The timer doesn’t work 1. Plug the transformer (power supply). 1. The transformer is not connected. 2. Electric cable deffective. 2. Replace the cable. 3. No power. 3. Revise the installation. 4. -
Page 21: Service Book And Maintenance
10. Maintenance manual NAME, SIGNATURE AND STAMP OF AUTHORISED TECHNICIAN SETTING UP TECHNICIAN ORDINARY FULL MAINTENANCE STAMP REPAIR EXTRAORDINARY SANITIZING GUARANTEE OTHERS TECHNICIAN FULL MAINTENANCE ORDINARY STAMP REPAIR EXTRAORDINARY DESCALING OTHERS GUARANTEE FULL MAINTENANCE ORDINARY TECHNICIAN REPAIR STAMP EXTRAORDINARY SANITIZING OTHERS GUARANTEE FULL MAINTENANCE... - Page 22 10. Maintenance manual NAME, SIGNATURE AND STAMP OF AUTHORISED TECHNICIAN SETTING UP TECHNICIAN ORDINARY FULL MAINTENANCE STAMP REPAIR EXTRAORDINARY SANITIZING GUARANTEE OTHERS TECHNICIAN FULL MAINTENANCE ORDINARY STAMP REPAIR EXTRAORDINARY DESCALING OTHERS GUARANTEE FULL MAINTENANCE ORDINARY TECHNICIAN REPAIR STAMP EXTRAORDINARY SANITIZING OTHERS GUARANTEE FULL MAINTENANCE...
-
Page 23: Ce Declaration
EN-61558-2-6 and fulfils the essential requirements of the directives:98/37/CE, 73/23/CEE, 89/336/CEE. PURICOM EUROPE- C. Aiguafreda 8 · Pol. Ind. l’Ametlla Park · 08480 Barcelona- Spain GUARANTEE CERTIFICATE FOR DENVER SERIES The system is installed and in cooperation to the satisfaction... - Page 24 C. Aiguaf reda 8 Pol. Ind. L’Ametlla Park 08480 L’Ametlla del Vallès Ba rcelona · Spain www.puricom.eu CS/08/146 The quality system of Puricom Europe for the marketing and assembly of water treatment equipments is certified in accordance with regulation UNE-NE-ISO-9001-2000.
Need help?
Do you have a question about the DENVER and is the answer not in the manual?
Questions and answers