Connect; Connect Video/Audio Cables - Philips BDP5100 User Manual

3 Connect

Make the following connections to use this product.
Basic connections:
• Video
• Audio
• Power
Optional connections:
• Route audio to other devices
• HDMI-compliant AV receiver/amplifier
• Multi-channel AV amplifier/receiver
• Digital AV amplifier/receiver
• Analog stereo system
• USB device
• Wired/Wireless network
Note
•
Refer to the type plate at the back or bottom of the
product for identification and supply ratings.
•
Before you make or change any connections, ensure that
all the devices are disconnected from the power outlet.

Connect video/audio cables

Select the best video connection that the TV can
support.
• Option 1: Connect to the HDMI jack (for a
HDMI, DVI or HDCP-compliant TV).
• Option 2: Connect to the component video
jacks (for a standard TV or Progressive Scan
TV).
• Option 3: Connect to the composite video
jack (for a standard TV).
Option 1: Connect to the HDMI jack
1
Connect an HDMI cable (not supplied) to:
• the HDMI jack on this product.
• the HDMI input jack on the TV.
8 EN
HDMI IN
Tip
•
If the TV has a DVI connector only, connect via an HDMI/
DVI adaptor. Connect an audio cable for sound output.
•
If there is a blank screen under HDMI connection, on the
remote control press
buttons) to recover picture display.
•
If this product connects to a TV compatible with 1080p
or 1080p/24Hz, Philips recommends HDMI category 2
cable, also known as High Speed HDMI cable, for optimal
video and audio output.
•
To play the digital video images of a BD-video or DVD-
video via an HDMI connection, it is necessary that both
this product and the display device (or an AV receiver/
amplifier) support a copyright protection system called
HDCP (high-bandwidth digital content protection system).
•
This connection provides best picture quality.
Option 2: Connect to the component
video jacks
Y Pb Pr
1
Connect the component video cables (not
supplied) to:
• the Y Pb/Cb Pr/Cr jacks on this product.
• the COMPONENT VIDEO input jacks
on the TV.
2
Connect the audio cables to:
• the AV OUTPUT-L/R jacks on this
product.
• the AUDIO input jacks on the TV.
Tip
•
The component video input jack on the TV might be
labeled as Y Pb Pr or YUV.
and then press "731" (numeric
AUDIO IN