KING KBP series User Manual

UNIT HEATER
®
• MULTI-PURPOSE • 950 - 6000 WATTS
PIC-A-WATT
CEILINGS UNDER 10 FT
FEATURES
®
Pic-A-Watt Element
Cast Iron Motor
Aluminum Fan Blade
Built-in Thermostat
Quiet Running
•
Multiple wattage selection
•
Powder-coated finish
•
Standard color: almond
•
Universal mounting bracket
•
Fan delay
•
Selector switch -
Fan / Heat / Off
• Tested under UL1278
• Bi-metallic limit turns
element off if an over tem-
perature condition occurs
then automatically resets
when normal temperature
returns
ENGINEERING SPECIFICATIONS
Contractor shall supply and install KBP Series unit heaters manufactured
by King Electrical Mfg. Company. Heaters shall be of the wattage and
voltage as indicated on the plans.
®
Pic-a-Watt heating element: Exclusive King multi-tap element allows
field adjustment to several wattages at time of installation. Steel
sheath elements of various resistance are copper brazed to steel
plate fins producing a multi-wattage heating element.
Built-in Thermostat: Single Pole factory installed hydraulic capillary
tube thermostat with precision heating control. Operating range 40º
to 90º F.
Fan / heat / Off Switch: 3-position switch provides heating and sum-
mer fan only operation. The DPST off switch provides a "positive off"
that disconnects all ungrounded conductors. Not available in 480V
and 3-Phase models.
UL1278
Tested under
68
LR43323
OPTIONS
• 30 Amp plug, cord, handle kit
• Remote thermostat (-RT)
• 24 Volt control (-RTLV)
KING ELECTRICAL MFG. CO. · 9131 - 10TH AVENUE SOUTH · SEATTLE, WA 98108 ·
TEL: 206.762.0400 · FAX: 206.763.7738
T
he KBP is an excellent choice
for a garage or shop heater with
the capacity to easily heat a large
space. The flow-through design
moves air efficiently by pulling air
from the back of the heater and
discharging it out the front.
This rugged heater has quality
components suitable for commercial
applications as well.
It comes standard with a 3-posi-
tion switch and an accurate built-in
thermostat listing degrees on the
label for precise temperature con-
trol. An included fan delay helps
dissipate heat from the elements.
Fan delay Switch: The fan continues to operate after the
Thermostat shuts off in order to remove the residual heat left
in the elements. Power must not be interrupted.
Universal Mounting bracket: Combination ceiling/wall/floor
bracket is included with every heater.
Unit bearing Motor: Permanently lubricated, cast iron, 4 -Pole
Motor with 20 cc of oil. Enclosed rotor provides long-lasting,
trouble-free operation. Thermally protected. 1300 RPM.
Auto-Reset Thermal limit Control: Heater shuts off when an
over temperature conditions exist and automatically resets when
the normal operating temperature returns.
Exterior: Textured acrylic powder-coating provides an attractive
Durable finish in almond color.
Approval: CSA (LR43323)
c us
www.king-electric.com
KBP
SERIES
This heater can be purchased
with optional (-K1) (120 Volt) or
(-K2) (240 Volt) accessory kits.