Preset Fm/Am Stations; Manual Station Preset - Yamaha RX-V1900 Owner's Manual

Hide thumbs Also See for RX-V1900:
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1
Before performing the following operations, set the operation
mode selector on the remote control to ESOURCE and then
press 3TUNER.

Preset FM/AM stations

Use this feature to store up to 40 stations FM/AM stations
(A1 to E8: 8 preset station numbers in each of the 5 preset
station groups). Preset the desired stations to this unit by
using the automatic or manual station preset.
■ Automatic station preset
You can use the automatic preset tuning feature to store up
to 40 FM stations with strong signals in order.
Press and hold KBAND (or 7BAND) for more
than 3 seconds.
The MEMORY indicator flashes and "AUTO
MEMORY" appears in the front panel display. After
approximately 5 seconds, automatic presetting starts
from the current frequency and proceeds toward
higher frequencies.
Flashes
A 1 F M 8 8 . 9 0 M H z
A U T O M E M O R Y
When automatic preset tuning is completed, the
MEMORY indicator disappears.
y
• To specify the preset group and number from which this unit
stores stations, press GPRESET/TUNING/CH l / h (or
8CAT./A-E l / h and 8PRESET/CH k / n) repeatedly.
• To cancel the automatic station preset, press KBAND (or
7BAND) again.
Notes
• Any stored station data existing under a preset station number is
cleared when you store a new station under the same preset
station number.
• If the number of received stations does not reach 40 (E8),
automatic preset tuning automatically stops after searching for
all the available stations.

■ Manual station preset

Use this feature to store the FM or AM stations.
1
Tune into a station.
See page 46 for tuning instructions.
2
Press HMEMORY (or 9MEMORY).
The PRESET indicator lights up in the front panel
and this unit automatically selects an empty preset
number.
y
• To store the selected station under an empty preset number
automatically, press and hold HMEMORY (or
9MEMORY) for more than 2 seconds instead of step 2.
In this case, the following steps are unnecessary.
• To cancel the manual station preset, press HMEMORY
(or 9MEMORY) again.
3
To select the preset group and number (A1 to
E8), press GPRESET/TUNING/CH l / h
MEMORY
(or 8CAT./A-E l / h and 8PRESET/CH k /
n) repeatedly.
• To select a higher preset station group and number,
Flashes
press Gh (or 8k).
• To select a lower preset station group and number,
press Gl (or 8n).
y
• You can also select a preset number (1 to 8) by pressing
the numeric buttons (A).
• If you select a preset number being used ("*" appears next
to the preset number), the current preset station will be
overwritten.
4
Press FENTER (or 8ENTER).
The preset station is set and the PRESET indicator
disappears.
Note
The reception mode (stereo or monaural) is stored along with
the station frequency.
Lights up
PRESET
M E M O R Y A 1
F M 8 8 . 9 0 M H z
Preset station group and number
PRESET
M E M O R Y C 2
F M 8 8 . 9 0 M H z
FM/AM tuning
47
En

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents