Summary of Contents for tanning essentials Rapid
- Page 1 SIMPLE TANNING SYSTEMS built purposely for a perfect spray tan. RAPID - TRAINING MANUAL www.tanningessentials.co...
- Page 2 Thank you for choosing the Tanning Essentials Rapid Spray Tan System. Please read the following to help assist you with the set up and maintenance of your spray tan unit. You can also view the full video on Rapid Spray Tan System Set Up, Maintenance and Troubleshooting via You Tube...
-
Page 3: Spray System
SPRAY SYSTEM Holders Carry Handle ON/OFF Switch Control Panel Power Plug Hose Connector Socket Washable Filter Shock Absorbing (Underneath Unit) Feet SPRAY APPLICATOR Solution Dial Adjustable (On Side) Spray Nozzle Spray Trigger Solution Cup Handle Hose Connector (Underneath) www.tanningessentials.co... - Page 4 SPRAY APPLICATOR STEP 1 Unscrew the solution cup and fill ¾ full. Overfilling the solution cup may cause leaks. STEP 2 Insert solution cup and screw tightly. STEP 3 Set nozzle by turning. Vertical position for up and down and horizontal position for left to right spraying.
- Page 5 SPRAY UNIT STEP 1 Attach hose to unit. Pull connection back exposing the prongs, ensuring the groove is facing the top, line up the prongs to meet the unit, release the connection and screw in clockwise until firmly in place and sitting straight. STEP 2 Attach Power cord and turn power on at the wall switch.
- Page 6 SPRAY UNIT MAINTENANCE GUIDE STEP 1 Clean the spray unit with a cloth. Avoid using anything abrasive. Windex and Mr. Sheen are useful products for maintaining the gloss finish of your spray unit. STEP 2 Clean the filter. Remove the filter from the base of the unit and rinse in warm water.
- Page 7 SPRAY APPLICATOR MAINTENANCE GUIDE Maintenance on the Applicator must be run at the end of each day the applicator is used. STEP 1 Remove hose. STEP 2 Unscrew solution cup and empty any excess solution. It is recommended that this be done over a sink or a wet area. STEP 3 Rinse the empty solution cup with warm water.
- Page 8 SECONDARY SPRAY APPLICATOR MAINTENANCE Secondary maintenance must be run on the applicator every 2-4 weeks or when required. Secondary maintenance will deliver a more thorough clean to prevent or clear any blockages and uphold the applicators performance. ADJUSTABLE O-RING SEAL NOZZLE RETAINING FLUID...
- Page 9 SECONDARY SPRAY APPLICATOR MAINTENANCE TROUBLESHOOTING - BLOCKED NOZZLE OR CONTINUOUS SPRAY WITHOUT PRESSING THE TRIGGER STEP 1 Locate and unscrew retaining ring. To release; turn retaining ring in an anti-clockwise motion. STEP 2 Gently pull on the adjustable nozzle to remove. STEP 3 Fit an 8mm spanner to the flat edges of the fluid nozzle and turn anti-clockwise to unscrew.
-
Page 10: Troubleshooting
TROUBLESHOOTING If you are experiencing problems with this unit, in the first instance please carefully read the relevant sections of the User Manual and the Troubleshooting section below. If you cannot solve your problem please contact your supplier for further assistance. PROBLEM CAUSE WHAT TO DO... - Page 11 TROUBLESHOOTING PROBLEM CAUSE WHAT TO DO There is a ‘C’ Your filter needs to be cleaned Remove the filter from the base of showing in the unit and rinse in warm water. place of the Wait until filter is completely dry number setting before re-fitting.
-
Page 12: Tips And Tricks
The client Exfoliate the skin before re-spraying appears sprayed onto the skin and ensure the spray application is lighter orange The client may have left a rapid tanning solution on too long The client may have low tolerance to DHA www.tanningessentials.co... - Page 13 TIPS & TRICKS PROBLEM CAUSE WHAT TO DO The spray The spray tan solution used may be Be sure to keep the solution in a cool dry old or heat affected reducing the place and ensure the solution is fresh tan has not reaction in the skin.
-
Page 14: Warranty Information
WARRANTY INFORMATION IMPORTANT Please keep your proof of Purchase and User Manual in a safe place as you will require these to make a warranty claim. Prior to making a claim you should read through the trouble shooting section in the manual and contact your supplier. All warranty claims should be made directly to your supplier. -
Page 15: Safety Information
SAFETY INFORMATION The Tanning Essentials Rapid Spray Tanning System is designed and built to the highest standards. This system must not be operated by children, sprayed using only professional spray tan solution, kept away from water and be connected to the correct power supply at all time. - Page 16 10 Apex Court, Thomastown, VIC. 3074 Australia PHONE: 1300 877 677 (within Australia) INTERNATIONAL PHONE: +613 9463 8900 www.facebook.com/tanningessentials EMAIL: sales@tanningessentials.co View our full video on Rapid Spray Tan System Set Up, Maintenance and Troubleshooting WEB: www. .com/user/TanningEssentials www.tanningessentials.co www.tanningessentials.co ..................................
Need help?
Do you have a question about the Rapid and is the answer not in the manual?
Questions and answers