Inhalt | Content Information on this user manual ..............14 Designated use....................14 General notes ......................14 Importer and Service ..................15 Safety Guide ......................16 Additional guidelines for Bluetooth devices .........17 Packing contents ....................17 Specifications ......................18 Getting started ....................19 Placing the speaker | Charging the battery ..........20 Making a connection ..................20 Accepting a phone call..................21 Connecting external devices via cable ............22...
Designated use The BoomStar BT is an active Bluetooth loudspeaker system for listening to music. The integrated amplifier is powered by an internal rechargeable battery. The designated use is defined by the instruction manual and in following the appliance and the warnings mentioned in this user manual.
Importer and Service Service Address lived non food GmbH TOR 8 – 9 Donaustraße 20 D-38120 Braunschweig Phone +49 (0) 531/224356-82 E-Mail service@x4-tech.de Internet www.x4-tech.de Adresse lived non food GmbH Donaustraße 20 D-38120 Braunschweig E-Mail info@lived-non-food.de Internet www.lived-non-food.de...
Safety Guide Please read the safety guide before using the product. This information is for your safety and the protection of the device and devices connected. You will also find specific safety instructions in the following chapters of this user manual. This product is not a toy and should not be handled by infants and small children.
Follow all safety instructions in this user’s guide and the user guides of the connected devices. If you have any doubts on the function or questions, please contact your local dealer or our service center. Additional guidelines for Bluetooth devices The short wave radio frequency signals of a Bluetooth device may impair the operation of other electronic and medical devices.
Specifications Bluetooth Frequency 2.4 – 2.48 GHz Connection mode Range 5 – 10 m (depending on the connected device) BT-Profile HS/HF, A2DP, AVRCP, OPP Power output Speaker 40 mm Frequency Response 100 Hz – 18 kHz S/N Ratio ≥ 85 dB ≤...
Getting started Power ON/OFF USB and AUX interface Recharge Indicator Volume + Preview/ Fast reverse Next/Fast forward Play/Pause/Answer/ Hang up/ Radial the phone Change Mode among Bluetooth/AUX via pressing it for 2 seconds Volume -...
Bluetooth or with NFC standard and is used as an external loudspea- ker. If connected through Bluetooth, the song selection and other functions can be controlled through the BoomStar BT. When using a mobile phone, the BoomStar BT can receive calls and be used as a hands-free device. Connecting through Bluetooth: ➝...
Accepting a phone call When the BoomStar BT is connected to a mobile phone with NFC standard, calls can be taken and the BoomStar BT can be used as a hands-free device. ➝ When receiving a call, tip onto the blue Bluetooth symbol (7).
Connecting external devices via cable The BoomStar BT can also be used as a wired active speaker system. ➝ Connect the headphone output of your music source (mobile device) with the BoomStar BT by using the supplied connection cable. ➝ Press and hold the blue Bluetooth symbol (7) for 2 seconds to change to AUX mode.
The device will not switch on. • Is the battery charged? • Check your connection and charging cables. The BoomStar BT is not recognised by my Bluetooth device. • Make sure that you have the newest update on your Bluetooth device.
Disposal Electrical- and electronic devices must never be disposed of in the regular household waste! Consumers are legally obligated and responsible for the proper disposal of electronic and electrical devices by returning them to collecting sites designated for the recycling of electrical and electronic equipment waste. For more information concerning disposal sites, please contact your local authority or waste management company.