Programming Codes; How To Enter Codes; Add/Remove Blocked Numbers Or Codes; Additional Blocking Features - CPR Callblocker V202 User Manual

P R O G R A M M I N G C O D E S
H O W T O E N T E R C O D E S
Pick up the phone and get a dial tone, then enter any of the codes below.
You will hear a single "BEEP" after each
You will hear three "BEEPS" if a code or number has already been entered.
A D D / R E M O V E B L O C K E D N U M B E R S O R A R E A C O D E S
Add:
Remove:
A D D I T I O N A L B L O C K I N G F E A T U R E S
1 **7# 7*# Turn on: Blocking all "Withheld/Private numbers".
**6# 7*# Turn o : Blocking all "Withheld/Private numbers".
1
2
**7# #
**6# #
3
**7# *#
**6# *#
4 **7# 0#
**6# 0#
**7# 6*# Turn on: Blocking all "Unavailable callers".
5
**6# 6*# Turn o : Blocking all "Unavailable callers".
6
**2# *2# Block the last called number. (UK only)
7
**1# *1# Reset the Call Blocker back to factory settings.
**7# (Number or Area code) #.
**6# (Number or Area code) #.
Turn on: Blocking all "Unknown callers".
Turn o : Blocking all "Unknown callers".
Turn on: Block all "International/Out of area callers".
Turn o : Block all "International/Out of area callers".
Turn on: Block all "International calls with 00 pre xes".
Turn o : Block all "International calls with 00 pre xes".
#
to con rm successful entry.
7