Advertisement
Always unplug the unit when not in use, when filling with water, emptying, cleaning or
moving the appliance.
Make sure that your hands are dry when operating the control dial or removing the plug.
PARTS DIAGRAM
OPERATING INSTRUCTIONS
Remove the Foot Spa and any accessories from the packaging.
Remove the plastic wrapping from the plug and unit.
1. Select the type of massage that you prefer by using the dial on the control panel:
a. Dry Massage: The foot spa may be used without water to simply massage your feet.
b. Wet Massage: To enjoy a wet massage, fill the foot spa with warm water.
Important:
Ensure the unit is unplugged before filling with water. Do not overfill the basin of
the foot spa. Remember to set a towel nearby to dry feet afterwards.
2. Plug in the appliance at the mains socket and switch on.
3. Select the vibrating massage function by using the dial on the control panel, as follows:
a. Position 0: Off
b. Position 1: Vibrating
4. Sit down in a comfortable chair and place your feet in the foot spa.
5. Enhance the massage by using ball massager or therapeutic nodes along the base of the
foot spa by rubbing you're your feet one by one over the ball massager and the therapeutic
nodes.
Removable splash cover
Moulded Base
Ball Massager
Acupressure Massage
Surface
nodes)
Control Settings
4
(therapeutic
Advertisement
