Selve i-R Marki Send Plus Operating Instructions Manual page 61

Procedure for initial installation
3. In order to display the current wind and sun values of the
sensor it has to be programmed in the i-R Marki Send Plus. To
achieve this, select the FUNCTION/PROGRAMME MODE
menu (M, +, +, +, OK, OK buttons from the OPERATING
MODE). Activate the programme mode = ON (+ button). Sub-
sequently press the PROG button of the sensor briefly. The
wind and sun values are shown on the display.
Display
SUN
–– 00
M - + OK
Display
PROGRAMME
MODE
OFF
M - + OK
Display
SUN
00 04
M - + OK
Display
➡
TIME/DATE
M -
3 x
Display
➡
PROGRAMME
MODE
ON
M -

61
Display
➡
FUNCTION
+ OK M
Sensor
➡
+ OK
1 sec.
GB
➡
- + OK
2 x
➡