Declaration Of Conformity - Colortac SmartLF SC 25 User Instructions

14
Manufacturer:
Colortrac Ltd
3-5 Brunel Court
Burrel Road
St Ives
Cambridgeshire
PE27 3LW
United Kingdom
Details of Electrical Equipment
Model Number: SmartLF SC 25/36/42
Description: Large Format Colour Document Scanner
Directives this equipment complies with:
Low Voltage Directive 2006/95/EC, EMC Directive 2004/108/EC
RoHS Directive 2011/65/EU. ENERGY STAR ®: Program Requirements for Imaging Equipment: Version 2.0
Harmonised standards applied in order to verify compliance with Directive:
EN 55022:2010 (Class A)
EN 61000-3-2: 2006/ A2:2009
EN 61000-3-3: 2008
EN 55024: 2010
Warning
This is a Class A product. In a domestic environment this product may cause radio interference in which case the user may be
required to take adequate measures
Test Report Issue by: CERPASS Technology (SUZHOU) Co., Ltd.
Year in which CE mark was affixed:
Signed ..........................................
Peter Brown
Managing Director
Colortrac Ltd
United Kingdom.
Other Standards Complied with:
China Compulsory Certificate
CCC (China) #20120010906547820 / GB9254-2008 (Class A). GB 4943-2001 GB17625.1-2003 Ref No. CNCA-01C-20:2010 Aug 27
CB Certification (IECEE) CB SCHEME
DK-26312-A2-UL additionally evaluated to EN 60950-1: 2006/A11: 2009/A1: 2010/A12: 2011; IEC 60950-1(ed.2), IEC 60950-1(ed.2); am1, national differences specified in CB test report #
U1207234-769 issued 2012-08-17.
Federal Communications Commission (FCC) Declaration of Electromagnetic Conformity
Standards Complied with:-
47 CFR, Part2 Part 15 and CISPR PUB 22 Applicable to ANSI C63.4-2009 (Assessed against CISPR PUB.22 and FCC Part 15 subpart B).
Report No. SEFV1207118 and the serials report SEFV1209009 apply.
We also refer 15.21 and 15.105 of the FCC regulations:
Section 15.21 Information to the user
An intentional or unintentional radiator shall caution the user that changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate
the equipment.
Section 15.105 Information to the user
NOTE: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed
and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful
interference in which case the user will be required to correct the interference at his/her own expense.
UL Certification for SmartLF SC 25/36/42 and SmartLF SC 25/36/42 Accessories
All SmartLF SC scanner devices referenced in this document have UL accreditation:
nd
UL 60950-1, 2 Edition, 2011-12-19 (Information Technology Equipment - Safety - Part 1: General Requirements) Test Report File No: E323749-A5-UL May 15
42) and UL 60950-1 Test Report File No: E323749 Vol.X1 August 24
CSA C22.2 No. 60950-1-07, 2nd Edition, 2011-12 (Information Technology Equipment - Safety - Part 1: General Requirements)
UL 60950-1, 2nd Edition, 2011-12 (Information Technology Equipment - Safety - Part 1: General Requirements)
SmartLF stand accessories (where purchased by the customer) have been tested and comply with the stability and general safety requirements of UL guidelines. The scanner accessories are
intended for use only with the SmartLF and must be assembled by a responsible person following the directions provided in the kit instructions.
SC25/36/42 Scanner
SC25/36/42 Scanner + Floor Stand
SC25/36/42 Scanner + Repro Stand - PC (optional) + Monitor (optional)
SC25/36/42 Scanner + PC Mounting Option - PC (optional) + Monitor (optional)
FOR SAFETY CONSIDERATION WEIGHTS AND SIZES MUST BE LIMITED TO:
– less than 15kg, maximum dimensions 43 x 42 x 18 cm
PC
– less than 6kg, maximum dimension 22 inches
MONITOR
.
DOCUMENT NO 88H011E

DECLARATION OF CONFORMITY

IEC 61000-4-2 : 2008
IEC 61000-4-3 : 2010
IEC 61000-4-4 : 2012
IEC 61000-4-5 : 2005
IEC 61000-4-6 : 2008
IEC 61000-4-8 : 2009
IEC 61000-4-11 : 2004
2012 (Attestation Number: SECE1209009)
Date: 9
th
2012, Project Number 12CA41598 (SC 25/36) refer.
December 2012
th
2012
th
2012 Project No. 12CA16480 (SC
Colortrac Ltd © 2015
9