Specifications - XOVision X450NAV Operation Manual

Tuner
07
DX/LOC Selector
During radio status, press 5 LOC button
to select strong or weak station reception.
LOC ON appears on the display and only
local station is available. When it disappears
both distance and local stations can be
received.
Note:
The function is only valid on the remote control.
*
The function is invalid in AM tuning.
*
Press and hold
MO/ST Selector
During radio status, you can press
6
button on the remote control to select
mode or mode.
STEREO
Stereo reception is charged when
STEREO
appears.
It is switched to mode when
MONO
appears.
Note:
It is only valid on the remote control.
*
Switch to MONO compulsively to improve
*
the listening quality when weak signal.
It is only valid in FM tuning.
*
Goto FREQ
Press GOTO, and the monitor shows:
2
FREQ, then press the Number to input the
valid frequency, then the TV program will
be played.
Note:
* It is only valid on the remote control.
*
38
Scanning/Memorizing Stations
Automatically
During radio mode, briefly press
button on the remote control to scan each
stored station 6 seconds respectively wh-
ich stored in 23 Number Buttons (from 1
to 6) . You can press the cor responding N-
umber Buttons or AMS but ton when your
desired station is charged. And it starts pl-
aying that station.
4
When press and hold AMS
will activate automatically memory storing
ST
function. The radio will automatically activate
MONO the memory storing function in any one of
23 Number Buttons (from1 to 6).
Note:
* The unit can store up to 6 stations for
MONO
each band.
* Pressing in the monitor performs the
10
same function.
Number Buttons
During radio mode, press Number Buttons
to receive the stored stations.
During radio mode, Number Buttons
(from 1 to 6) can help you
23
ur favorite station. You can follow the
as below:
station, press
1
When receiving a station,press and hold
any one of the Number Buttons
(from 1 to 6) until the number app-
ears on the LCD, which indicates that
station is already stored in the corresp-
onding number button.
4
2
Press and hold AMS button to receive
stations automatically, and store them in
1 to 6 number respectively.
3 Press and hold another number button
for more than 2 seconds while listening
to a station on another number, the
station will be stored in that number
button.
Note:
Pressing in the monitor performs the same
* 5
function.
Before You Start

Specifications

AMS
4
General
Power Requirement
Load Impedance
Max.Power Output
the automatic
button it ,
Tone Controls
the
Dimensions
Weight
FM Section
Tuning Range
(Optional)
store yo-
IF Range
steps
Usable Sensitivity
(-30dB)
Signal-to-noise Ratio
Stereo Separation
Frequency Response
AM Tuner Section
Frequency Range
14.4V DC
(11-16V allowable)
(Optional)
IF Range
45W x 4
Usable Sensitivity
7dB
(-20dB)
Bass 100Hz
Treble 10KHz
VCD/CD Player Section
Approx.197x178 x 50
VCD Signal System
mm (d/w/h)
Signal-to-noise Ratio
Approx.1.76kg
Separation
Distortion
DVD Player Section
87.5-108(MHz)
DVD Signal System
(Europe)
Channels
87.5-107.9(MHz)
(U.S.A.)
Frequency Response
10.7MHz
Signal-to-noise Ratio
Separation
10dBuV
50dB
Note:
Due to continuous product improve-
30dB 1KHz
ment, specifications and design are
40 Hz -12KHz subject to change without prior notice.
01
522-1620(KHz)
(Europe)
530-1710 (KHz)
(U.S.A.)
450KHz
32dBuV
AUTO/PAL/NTSC
60dB
55dB(1KHz)
0.3%
AUTO/PAL/NTSC
2
40Hz to 16KHz
60dB
60dB
11