Check Your Package Contents; Install The Capture Card To Your Pc; Install The Driver; Install Ip Camsecure - CP TECHNOLOGIES FCS-8005 Quick Install Manual

English English

Check your package contents

FCS-8005/8006

Audio/Video Cables

CD Manual / Driver / Utility


Install the Capture Card to your PC

Step1: Insert the card onto an empty PCI slot. Connect the Audio/Video cables
to the connectors in the same color.
Step 2: Turn on your PC and start Windows.

Install the driver

Insert the included CD into CD-ROM. The setup page should load
automatically. If it does not, please select your CD-ROM drive manually to run
autorun.exe.
Click "Install Software" (Figure 1-1)

Click "Capture Card's driver" (Figure 1-2)

Click "Install" to install the driver (Figure 1-3)

Click "Finish" to complete the driver installation. (Figure 1-4)

Run dxdiag.exe from start menu 'Start-> Run' to check your DirectX

version. If the installed version is less than 9.0, install DirectX 9.0 from the
CD-ROM directx9/ directory.
Restart your PC.


Install IP CamSecure

Click "Install Software" (Figure 1-1)

Click "IP CamSecure" (Figure 1-5)

Follow the onscreen instruction or refer to the user's manual to complete
installation.
5