Service And Maintenance - MAGIC FX SMOKEJET User Manual

FLUID
Use MAGIC FX Smoke Fluid for the best effect for the SMOKEJET. The machine is
tested and calibrated with this liquid to get the best output performance. Warranty
will be void if any other type of liquid is used, improper use of liquid may lead to
machine failure and malfunction.

SERVICE AND MAINTENANCE

Do not allow the machine to become contaminated.
Remove dust from air vents with air compressor, vacuum or a soft brush.
Only use a damp cloth to clean the casing.
Before storing run distilled water through the system to help avoid condensing
the pump or heater.
It is recommended to run the machine on a monthly basis in order to achieve
best performance and output condition.
Excessive dust, liquid and dirt built up will degrade performance and cause
overheating.
BREAKER RESET
Disconnect AC power before reset breaker. Only replace fuse with same
type and rating.
Step 1: Disconnect AC power
Step 2:
Flip breaker to ON position
Step 3: Turn on machine to test
BREAKER
230V = 9A 250V