Summary of Contents for DM Engineering Mic Pro
- Page 1 USER GUIDE DM Engineering Mic Pro Microphone ON/OFF Lighted Pushbutton Module Version 1.2 DM Engineering 2174 Chandler St. Camarillo, CA 91345-4611 805-987-7881 800-249-0487 www.DMEngineering.com...
- Page 2 Monitor speaker muting and "ON AIR" or "RECORDING" signs are controlled the SLAVE relay pack. The MIC PRO is attached to the mixing board with the supplied hook and loop fastener system or double sided tape (for a more permanent solution), as shown below.
- Page 3 Route the control cable along the side of the board and secure with the supplied cable ties and anchors. Remove power from the relay pack and attach the “Mic Pro” control cable to the Studio SLAVE Relay Pack mini-din input connector:...
- Page 4 Warranty Information: he DM Engineering Mic Pro is warranted for a period of one year from the date of purchase. This warranty covers materials and workmanship only. Any misapplication, physical or electrical damage from outside sources or by customer is not covered. The customer must pay shipping costs to the factor y, and DME will pay shipping costs to return the warranted equipment to the customer.
Need help?
Do you have a question about the Mic Pro and is the answer not in the manual?
Questions and answers