Pfaff creative 2170 Owner's Manual page 120

I
K
L
M
Q
N
O
R
P
V
If you touch the Repositioning icon (I), the design or the combination
which protrudes beyond the hoop returns into the hoop.
With the Move design icon (F) a design which has been moved can be
positioned at the center of the embroidery hoop.
If you confi rm your input with OK, the window will be closed and
your settings are saved.
J
If you touch ESC, the window will be closed and the process is
cancelled.
F
If you touch the Undo icon (J), the command described before will be
cancelled.
If you confi rm the input with OK, the window will be closed and your
settings saved.
The Move design or the rotate functions remain activated. They are
switched off by touching the respective icon.
If you touch ESC, the window will be closed, the design or the
combination returns to the original position, and the process is
interrupted.
The Move design or Rotate functions, however, remain active. They are
switched off by touching the respective icon.
Precise Positioning a design
The precise positioning function can be used if you want to connect
two or several designs to each other. This function will help you to
place the designs exactly where you want them.
Precise Positioning
K. Corner indication
L. Padlock icon, unlocked
M. Fine tuning arrows
N. Zoom icons
O. Rotate icon, unlocked
P. Move design icon
S
Q. Pan mode icon (active when zoomed in)
T
R. Cross-hair cursor, unlocked
S. Arrow icons
T. Padlock icon, locked
U. Rotate icon, locked
U
V. Cross-hair cursor, locked
5:23