Pfaff creative 2170 Owner's Manual page 106

Information
When touching the information icon you will get information about
the embroideries on your screen (C). "Actual" indicates the last selected
design. "Selected" indicates which designs are selected and "Num of
entries" indicates how many designs you have on your screen. You will
also fi nd information about the length and width of the designs.
Data Manager
In the Data Manager you will fi nd your stitches and embroideries that
have been saved in the machine. Read more about the Data Manager
on page 5:36.
Embroidery speed
When you are embroidering the machine sets the speed according
to what hoop you are using and the length of stitches. If you use a
small hoop, the speed will be set to a higher level than if you are
embroidering in a large hoop. If you are embroidering on a larger
hoop than the 80x80 hoop, you can increase the speed by touching
the Context menu and choosing Embroidery Speed. You will see
that Auto is selected and that you have the option to choose between
Medium and High. Set the embroidery speed after the machine has
made the hoop detection because the hoop detection will always set the
embroidery speed to Auto.
C
IMPORTANT! The embroidery quality may be compromised when
embroidering at a higher speed.
Back to default setting
This function allows you to reset all the machine settings that you have
previously changed, such as the stitch settings or sewing functions, to
the default settings. You can also reactivate the information texts. All
the texts are shown automatically. You need to touch OK to confi rm.
Thread snips
You can turn off the Thread snips function permanently with this
selection. When you touch the Thread snips icon a window appears
(D) where you can choose between Off and Auto. If you touch Off and
D
confi rm with OK, the threads will no longer be cut, even if you have
selected the icon in the Tie-off program. The standard setting is Auto
which means that the threads are automatically cut.
5:9