Getting Started - Jarv DuraVibePro User Manual

GETTING STARTED

To use your Jarv DuraVibe Pro Bluetooth Speaker, please follow
these steps:
1. Charge your Bluetooth speaker fully
2. Pair your Bluetooth Speaker to a Bluetooth-enabled device prior
to use.
CHARGING YOUR BLUETOOTH SPEAKER
Your Jarv DuraVibe Pro Bluetooth Speaker come with a built-in
rechargeable battery and a Micro USB charging cable. Charge
fully before use. The battery indicator will turn red when
charging and turn green once charging is complete. Initial
charging time is approximately 3-4 hours.
PAIRING YOUR BLUETOOTH SPEAKER
In order to use your Jarv DuraVibe Pro Bluetooth Speaker with a
Bluetooth-enabled device, you will rst need to pair the two.
1. Place the Bluetooth Speaker and the Bluetooth enabled device
where they are easily viewable and no more than 3ft. apart.
2. Turn ON your Bluetooth pairing function on your device
3. Turn the speaker on by pressing down the Power button for
about 7 seconds. A Blue LED light will start ashing quickly
indicating that the speaker is now in Pairing Mode.
4. The speaker will appear as "DuraVibe Pro" when scanning for
available Bluetooth devices within range.
5-Once Pairing is successful a chime will be heard through the
speaker
5