Download
Share
Print this page
Samson SROM 1170 Instruction Manual
  1. Manuals
  2. Brands
  3. Samson Manuals
  4. Drill
  5. SROM 1170
  6. Instruction manual
Samson SROM 1170 Instruction Manual

Samson SROM 1170 Instruction Manual

Hide thumbs
1
2
3
4
5
6
7
8
9

Advertisement

Quick Links

Download this manual
Instruction Manual
CORDLESS DRILL & DRIVER
18V
Model SROM 1170

Advertisement

loading

Summary of Contents for Samson SROM 1170

  • Page 1 Instruction Manual CORDLESS DRILL & DRIVER Model SROM 1170...
  • Page 2 Product Features:...
  • Page 3 SAMSON 1 Year DIY Warranty: All Samson Power Tools are backed by a comprehensive 1 year DIY warranty. If for any reason you experience a fault with this power tool, please contact the retailer that it was purchased from, present the receipt and warranty card (at the back of the operating manual), for a full refund or replacement.
  • Page 4 Service  Specific Cordless Drill Safety Instructions  Specific Battery Pack and Charger Safety Instructions  Samson Cordless Drill Operating Instructions  Maintenance & Cleaning  Samson Cordless Drill Technical Data DESCRIPTION OF SYMBOLS: Please read all of the safety and operating instructions carefully before using this Cordless Drill.

  • Page 5: General Power Tool Safety Warnings

    GENERAL POWER TOOL SAFETY WARNINGS: WARNING Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. Save all warnings and instructions for future reference. The term "power tool" in the warnings refers to your mains-operated (corded) power tool or battery- operated (cordless) power tool.
  • Page 6 b) Do not use the power tool if the switch does not turn it on and off. Any power tool that cannot be controlled with the switch is dangerous and must be repaired. c) Disconnect the plug from the power source and/or the battery pack from the power tool before making any adjustments, changing accessories, or storing power tools.
  • Page 7 a) Before use of the charger and the battery pack, read the instruction manual for it carefully. b) During the charge process, the current used should correspond to the current of the battery charger. c) Never let moisture, rain or splashed water reach the charging location. º...
  • Page 8 SAMSON CORDLESS DRILL OPERATING INSTRUCTIONS Insert and Remove Battery:  To insert, slide the battery pack into the bottom of the handle (until it clicks into place).  Remove the battery pack by pressing the release buttons either side of the battery pack, and allowing it to drop out of the drill’s handle.

  • Page 9: Maintenance And Cleaning

    Torque Setting The torque setting will regulate the driving power when using a screwdriver bit. This will help prevent damage to the work piece and/or screw. Always start with the lowest torque setting (1) and increase if necessary. For drilling set the torque selector to the position indicated by the drill bit symbol. Overload Protection: When overloaded, the motor will stop.