Related Manuals for nekos PIK
Summary of Contents for nekos PIK
- Page 1 CHANNEL REMOTE CONTROL 433,92 MH MANUAL FOR INSTALLATION AND USE Code 4420066 Edition 1 of 10/12/2011...
-
Page 2: Table Of Contents
The device described in this manual has been manufactured in accordance with safety standards and conforms to the stipulations of current standards in force. When correctly assembled, installed and used according to the present instructions, it will not generate any danger for persons, animals or items. -
Page 3: Safety Indications
Notes for functioning and use PIK is a radio transmitter – or simpler a remote control – to command devices provided of a receiver with the same code protocol or the same transmission philosophy. For further details see chapter “Technical data”. -
Page 4: Technical Data
76 g 3. Technical and constructional information The PIK radio remote control transmits radio waves at the frequency of 433.92 MHz. It has a protocol that changes its code at each transmission (rolling code) according to a predetermined algorithm with a total of over 18 x 10^18 possible combinations. -
Page 5: Id Plate And Marking Data
4. ID plate and marking data PIK remote controls have marking and are destined for use in the European Union without further requirements. The marking on the product, packaging and indications for use provided with the product indicate ‘presumed conformity to the directives’ issued by the European Community. -
Page 6: Control Of A Stored Sequence - M1 And M2 Memories
Memory M2 ♦ Press the M button for 5 seconds, and the flashing icon M1 appears. Now press the CH button and the icon M2 will appear flashing on the display. ♦ Scroll through the channels using the ▲▼ arrows, and the various channels will flash. To enter the channel in the memory, press the STOP button, the channel stops flashing and becomes steady-on;... -
Page 7: Application For System Tris Motors - 3 Motors For: Window, Blinds And Rolling Shutter
B. Application for SYSTEM TRIS motors – 3 Motors for: window, blinds and rolling shutter ♦ The actuator for the window is controlled directly by the channel selected with the ▲▼ buttons. ♦ To operate the motor of the internal blinds, the F1 function is used. Press the F1 button;... -
Page 8: Recall To Main Principles Of Warranty Certificate
Telephone 0424 411011 – Fax 0424 411013 www.nekos.it info@nekos.it NEKOS S.r.l. company declares that the below indicated remote transmitter is manufactured in compliance with the following Directives: R&TTE 1999/5/CE - (Directive 1999/5/CE of Parliament and European Council of 9 March 1999);...