Related Manuals for Hama 00062772
Summary of Contents for Hama 00062772
- Page 1 Hama GmbH & Co KG Postfach 80 86651 Monheim/Germany Tel. + 49 (0) 90 91 / 5 02-0 Fax + 49 (0) 90 91 / 5 02-2 74 hama@hama.de www.hama.de 00062772-06.05...
- Page 2 00062772 DVB-T USB 2.0 Stick...
-
Page 3: Table Of Contents
Copyright note © Copyright 2005. All rights reserved. Hama GmbH & Co.KG reserves the right to modify the products and informati- on at any time without prior notice. This user manual may not be reproduced in any from without the explicit written consent of Hama GmbH &... -
Page 4: Chapter 1: Introduction
Chapter 1: Introduction Introduction The DVB-T USB 2.0 receiver is completely compatible with the DVB-T protocol and can receive digital TV via anten- na so you can receive and enjoy digital transmissions on desktop and laptop PCs. Installation is very easy and the device provides a user-friendly USB interface. No external power pack required. Thanks to the elegant and compact design, you can enjoy the programmes in digital quality at home, the office or on the go. -
Page 5: Chapter 2 Installing The Dtv/System Software Installation
Chapter 2 Installing the DTV/System Software Installation The software for the DVB-T transmission is very powerful. You can enjoy the digital sound output and visual effects in high quality. The software not only allows you to receive the TV programmes, but also enables you to make digital video recordings (DVR) in real time. -
Page 6: Configuring The Dtv User Program
2.1 Configuring the DTV user program Due to the various countries or regions, the DVB-T has its own frequencies. The following manual should help you in configuring the parameters in your region. Scanning frequencies: 1. Click on the control panel and then select Scan Channels. - Page 7 2. Select the RF frequency. You can select one of the following options: (1) Land/Region: Select your location. (2) All: If you do not find your location on the Land/Region list, select this option. (3) Area: You can determine your own frequency range. Select VHF or UHF and then enter its frequency range.
-
Page 8: Setting The Recording Process
2.2 Setting the recording process Two methods are available for recording: Recording in real time or according to the time schedule. I. Recording in real time: When recording the program in real time mode, the recorded file is stored in the default target folder under C:\Programs\DTV\DVB-T USB 2.0\Capture\Video.mpg. - Page 9 II. Recording according to the time schedule: Select Setup and the recording option. Then select Activate Default. Double click Channel in the default recording section.
- Page 10 When the Recording Input window appears, select the channel and enter the start time and end time of the recor- ding. Click OK to continue. Once the recording ends, the ok menu is displayed as follows. Note: You cannot simultaneously record two programs that have different frequencies. Note: Observe the capacity of recording device.
-
Page 11: Configuring The Display
2.3 Configuring the display In the display configuration window, you can set the brightness, contrast and richness as desired. Move the mouse cursor to perform theses settings. To reset the setting to the default setting, click Reset 2.4 Configuring the recording You can record and store an image. -
Page 12: Configuring The Timeshift
2.5 Configuring the timeshift If you must leave in the middle of the program, you can start the timeshift function. Simply click Play when you return. The system plays the program starting from the time you left. The longest time shift is ten minutes. -
Page 13: Chapter 3: Dtv Software Overview
Chapter 3: DTV Software Overview 3.1 Control panel Symbol functions Symbol Function Symbol Function Full screen Play Online help Rewind, Fast-forward Previewing several channels Stop Channel up and down Pause Channel recall Video recording Personal selection Photo Timeshift Mute Open saved file Volume up Configuration Volume down... -
Page 14: Right-Click Menu And Keyboard Access
3.2 Right-click menu and keyboard access Right-click while the DTV application software is running and the menu appears with the functions and keyboard access as follows: Function display Quick link Feature description Play Input Plays the program Pause Space Interrupts playback Stop Stops playback Record... -
Page 15: Functions
3.3 Functions Clock The clock is automatically set to the time of the host computer. Channel title display The current channel name is displayed on the control panel in the language set by the channel provider. Video recording To record videos, click . - Page 16 •∞ Volume display: When you set the volume, the volume Symbol changes accordingly. •∞ Electronic program guide menu: To enter the program menu, select on the control panel. You then receive information about the channel programs such as the program schedule. (This function depends on whether it is provided by the channel provider or not.) General setting function: a.
-
Page 17: Chapter 4: Troubleshooting
Chapter 4: Troubleshooting This chapter should help you in remedying faults that can occur during installation and operation. 1. The DVB-T USB 2.0 receiver does not function properly. Check whether the driver is correctly installed. You can check this in the driver installation in the Device Manager under Control Panel. - Page 18 8. I cannot play the program Make sure that installed the soundcard driver and the soundcard functions. Please note that the soundcard and its driver must be installed, regardless of whether or not you need to activate the sound. Check the signal quality and signal strength. 9.