Lorex CA453 Instruction Manual
Lorex CA453 Instruction Manual

Lorex CA453 Instruction Manual

5” b&w rear view system camera

Advertisement

Quick Links

5" B&W Rear View
System Camera
Instruction Manual
MODEL:
CA453
www.lorexcctv.com
©
Copyright
2007 LOREX Technology Inc.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the CA453 and is the answer not in the manual?

Questions and answers

Summary of Contents for Lorex CA453

  • Page 1 5” B&W Rear View System Camera Instruction Manual MODEL: CA453 www.lorexcctv.com © Copyright 2007 LOREX Technology Inc.
  • Page 2 Thank you for purchasing the Lorex 5” Black & White Rear View System Camera. This system helps to prevent backing-up and parking accidents by allowing you to view or check on the traffic behind your vehicle, or when rounding corners (blind spot prevention).
  • Page 3 4. Keep enough space around the unit for ventilation. Slots and openings in the storage cabinet should not be blocked 5. During lightning storms, or when the unit is not used for a long time, disconnect the power supply, antenna, and cables to protect the unit from electrical surge LOREX TECHNOLOGY INC. http://www.lorexcctv.com...
  • Page 4: Table Of Contents

    Full Connection Diagram ................7 Operating Instructions ................7 Camera Specifications - Appendix #1 ............8 Lorex CVA453 Accessory Cables - Appendix #2........9 CA453 FEATURES • Automatic switching of camera when gear is shifted into reverse • Built-in microphone on camera (One-way audio).
  • Page 5: Getting Started

    Getting Started Getting Started The CA453 Camera comes with the following components: 1/3” CCD Weatherproof Camera 65’ (2 Piece) Camera Extension Cable CHECK YOUR PACKAGE TO CONFIRM THAT YOU HAVE RECEIVED THE COMPLETE SYSTEM, INCLUDING ALL COMPONENTS SHOWN ABOVE. Camera Installation 1.
  • Page 6: Mounting The Cameras And Cables

    Mounting the Cameras and Cables Mounting the Cameras and Cables 1. Determine the desired camera mounting position. Install the bracket into position using the supplied screws on the center and slide holes. 2. Adjust the bracket to the left and right to set the position, and tighten the screws. 3.
  • Page 7: Full Connection Diagram

    Full Connection Diagram Full Connection Diagram 1. Connect the RED wire to the (12V – 32V DC) power terminal, which powers the system when the ignition key is turned on the vehicle. 2. Connect the BLACK wire to a metal portion of the vehicle or the negative battery post. 3.
  • Page 8: Camera Specifications - Appendix #1

    70mm (W) x 50mm (H) x 50mm (D) Weight 0.75 lbs / 0.34 kg As our products are subject to continuous improvement, LOREX Technology Inc. and its subsidiaries reserve the right to modify product design, specifications and prices, without notice and without incurring any obligation. E&OE...
  • Page 9: Lorex Cva453 Accessory Cables - Appendix #2

    Lorex CVA453 Accessory Cables - Appendix #2 Lorex CVA453 Accessory Cables - Appendix #2 Additional adapter cables are available for backward compatibility between the Lorex 452 Series and the Sentinel CCTV 452 Series Rear view systems. Adaptor Cable #1 - CA452 (Camera...
  • Page 10 It’s all on the web Product Information Specification Sheets User Manuals Software Upgrades Quick Start Guides Firmware Upgrades VISIT www.lorexcctv.com wwwlorexcctv.com Lorex Technology Inc.

Table of Contents