Page 2
3D Magic Pen™ Filament loading hole DC socket OLED screen Temperature + Temperature - Unload filament button Load filament button Speed controller Nozzle CAUTION: Do not touch the nozzle of this pen as it becomes extremely hot, as is the filament when first extruded.
Page 3
3D Magic Pen™ In the Box • Three coils of colored filament • AC/DC adapter • Power cord • User manual • 3D Magic Pen Note: 1. Heating time may be affected by environmental temperature. 2. The filament end should be cut correctly before loading (see page 6). 3.
3D Magic Pen™ Operation Instructions 1. Connect AC/DC adapter to AC power socket and 3D Magic Pen DC power socket (or use the USB cable to connect with power bank which outputs more than 2 Amps). When the OLED screen is on, it means power is connected.
3D Magic Pen™ Troubleshooting Problem Reason Solution Insufficient temperature Adjust the temperature Remove the filament Slipping gear and cut off the damaged No filament is coming filament then reload out from nozzle Unload the stuck filament and cut off the end of Filament loading failure filament cleanly then reload...
3D Magic Pen™ Filament Cut Correct Wrong Wrong Specifications • Feeding speed: Adjustable • Filament types: ABS or PLA (Note: PLA filaments are not supplied by the manufacturer) • Electric parameter: DC5V 2A 10W • Nozzle diameter: 0.6mm • Filament diameter: 1.75mm •...
Page 7
3D Magic Pen™ Warning 1. This equipment is suitable for children 8 years old and older. Children should only use this unit under adult supervision. 2. The nozzle is extremely hot, do not touch it. 3. Do not place any other material into the filament loading hole. 4.
3D Magic Pen™ Product Registration Instructions Visit: www.HamiltonBuhl.com 1. Click on Customer Care 2. Click on Product Registration Icon 3. Please fill out all fields marked with * to register Warranty: Warranty begins the date item ships from our warehouse. All products, except for metal carts, have a one year warranty from original date of shipment, unless otherwise noted.