Advertisement
LISTENING TO USB/SD card
1.
Press the Power/Mode button until the Led Display indicate "USb" or "CArd". If not USB or
SD card, the led display will indicate "no". Once the USB flash/SD card insert into the USB
or SD card slot, it will automatically start playback. Press "Prev" or "Next" to select the
previous or next track.
2.
To select repeat one song, select the song that you want to repeat. Press "Prog" once, the
Led display will show "1" on the bottom right corner.
3.
Press "Prog" once again to repeat all tracks. The Led display will show "All" on the same
corner.
4.
Press "Prog" one more time to select Random. The Led display will show "RDM" on the
top.
5.
Press "Stop" button to stop playback.
6.
To select the volume level, Turn the rotary Volume Control Knob.
LISTENING TO BLUETOOTH
1.
Press the Power/Mode button until the Led Display indicate "bLUE", the Led display will
flash. Pairing the audio source with the unit by select "JUKEBOX". Once it connected, the
Led display will stop flashing.
2.
You can select previous or next song by using the "Prev" or "Next" button on the front
panel or using your audio source.
To select the volume level, you can turn the rotary Volume Control Knob on the front
3.
panel or control by your audio source.
LISTENING TO AUX-IN
1. Insert the provided Aux-in cable into the Aux-in Jack, the unit will immediately goes into
Aux-in mode. The Led display will indicate "AUH".
2. Use the controls on your Aux-in audio source to select your desire songs.
5
Precautions – Safety Information –
CAUTION:
1.
Use of controls and adjustments or performance of procedures other than those
specified here, may result in hazardous radiation exposure.
2.
If this product develops trouble, contact a qualified service center, and do not use the
product in a defective state.
See Markings on the back of the unit –
CAUTION:
To prevent electric shock, match wide blade of plug to wide slot, fully
insert.
2
Advertisement
