Summary of Contents for JHV Limited TS-IP600
- Page 1 Hd IP camera operating instructions Dear customer, welcome to use this product, before using this product, please read the operation instructions in detail, and save this manual for future reference.
-
Page 2: Product Parameters
Product Parameters > H.264 1/4" Color CMOS Sensor 1,000k Pixels > support 1, 4 and 9Ch image display and full screen view on web browser >Suport QR Code Scanning. > Maximum support 32G TF Card >High image and video quality, Two-way audio monitoring >P2P(Plug and Play)technology, penetration degree can be 99%, applicable toany >Allow remote Pan/Tilt control (Pan:350 Tilt:120) >Mechanical IR-Cut device offers outstanding day/night performance, great color;... -
Page 3: Spec Sheet
Spec sheet Model TS-IP600 System security Account, password authority management Local Storage support up to 32GB MicroSD card,24-hour loop recording. Monitor Advantage Support PC computer monitoring, smartphone multi-pic view. Plug and Play,99% penetration rate, Easy to setup: 1. connect the network cable and power adapter, 2.install APP, scan UID code to add camera. - Page 4 1 Channel Line in (3.5mm phone jack) &1 Channel Internal -48d Input B Microphone 1 Channel Line out (3.5mm phone jack)&Internal speaker(8Ω1W Output Pan:355,Tilt:120 network interface 10Base-T/100Base-TX Ethernet interface TCP/IP,HTTP,TCP,UDP,SMTP,FTP,DHCP,DNS,DDNS,NTP,RT Network Protocol SP,P2P,etc. Network wireless network se WPS encryption curity Online visitor Support 4 online visitors simutaneoursly WIFI...
- Page 6 II 、 Interface definition and wiring diagram Network interface：suitable for accessing network using network cable. ＷＩＦＩantenna：receive WIFI signal； Memory card socket：insert memory card,support 32G:device can stock video/picture; Power supply interface；connect power supply adapter（only support DC5V,2A input）； III、Mobile phone software operation For better experience the convenience that brought by this product , pleas e download mobile phone software before using this product: 1、Mobile phone software download:...
- Page 7 3) Also can input http://yoosee.co/ in the explorer to download it in PC，Android version and IOS version can scan the QR code to download the software directly， PC click to download directly. 2、Mobile phone ID register Yoosee Note：first open the “ ”...
- Page 8 remember this ID,it can be used as the user name ,click “confirm”,input the password you set just now again,then you can log in normally. 3、Mobile phone network connection There are two ways for connecting device to network： 1) Wired connection： after the camera power on,connect one end of the cable to the camera ,the other end to the router LAN port(please be sure the router open the DHCP function) ,the network light will be normally on after connection successfully.
- Page 9 C、set WIFI by “intelligent online”：【details refer to 4、add device on mobile phone》2）】 4 、 Add device on mobile phone How to add the device to device list: 1）、In the device list interface of the“Yoosee”software，when the camera is in network and the phone is in the same WIFI,both of them are in one LAN,the software will find all the devices automatically,and only need choose ,add and set the access password is ok.
- Page 10 2）、intelligent online：open the Yoosee software,click “Device”,choose the“ +”button ,choose “intelligent online”,click next and then choose the WIFI and WIFI password you need,click the “next” again ,connect the device. 3）、Add device manually：in the device interface of the Yoosee software,click the “+” ,input ID and password is ok.
- Page 11 5、The device monitor of mobile phone 1） 、 contact person： click the device icon that has been added in device list to entry the monitor mode . 6、The video settings of mobile phone. 1）、Video：this device supports 32GB TF card in max ,if need record video,please insert the memory card at first,and then open the Yoosee :click Device ->Device name ->settings->video settings,user can choose record video manually ,alarm video, timing video.
- Page 12 The following is the learning code ways: A、 Please add device to device list in Yoosee software. B、 Click Device->device name->settings->zone settings C、 Eg:you want to learn one door sensor that installed in the hall,the serial number is 1.Click “Hall”-click number 1,pop-up: Click “confirm”，and trigger the alarm you will learn at the same time(take the door sensor as example,separate the door sensor will trigger the alarm).if match code successfully,the words will be turn blue from gray,and will pop-up :learn...
-
Page 13: Device Upgrading
ways of matching code is the same as “A、 B、 C” ， the function is equal to the right of the device list in the Yoosee software，it can be used as “arming,disarming”，but it need match with the device learning . 2）、delete match code ：click the access number that had learned,confirm delete is ok. - Page 14 IV、The software operation in PC 1, Download software to PC 1)、input http://yoosee.co/ in the PC explorer ,click the icon to download directly. PC CMS 图片文字翻译：电脑软件：PC software 2、log account in PC there are two ways to log in, select "remote login" ,use the ID( email/phone A、...
- Page 15 3、 Computer terminal network connection (the same as mobile phone software operation three ", 3) Add device to PC. How to add device to the device list?In fact, there are many kinds of ways to achieve,specific methods, please refer to:1）、In the left side of the "CMS" software interface, click the button ，...
- Page 16 5、Device monitor in PC. Open CMS software， right click device name -》 start monitor， as the following picture: 6、The video setting in PC. 1）、Video: this device can store the video in the computer's hard disk, right click on the monitor screen ,select "start video" (note: be sure only in the computer monitoring condition ,the video can be stored in the computer's hard disk) 2）、Playback：this device can playback the video from computer, open the CMS...
- Page 17 software， click on the replay button ， choose "playback" , user can find the playback files according to the date, then play it directly . (note: the video in computer hard disk only can be played in PC ,does not support playing in mobile )
-
Page 18: Restore The Factory Default Settings
V、Restore the factory default settings Reset will erase all user Settings: including WIFI information,access password , alarm information, arming zones information The steps:Find the reset hole at the bottom of the device,and then use needle to insert it ,press it more more than three seconds after hearing "di" sound ,when hearing the sound like "draw the sword", reset successfully. -
Page 19: What Is In The Package
What is in the package 1.IP Camera 2.User Manual 3.Color Box. 4.Power Adapter(US/UK/AU/EU optional) 5.Network Cable Warranty Warranty period is 2 years...