Breville VCF041 User Manual page 8

before first use
5. Plug the unit into the mains supply and switch on. Turn the control lever to the HEAT
UP position ( ). The power indicator light will flash. After approximately 3 minutes
the power indicator light will remain on to show that the water is hot.
Note that the time taken for the water to heat fully will depend on the amount of water
in the boiler.
6. To start cleaning, turn the control lever anti‑clockwise and hold in the DISPENSE
position ( ). Clean water will be flushed through the unit into the cup. When all of
the water from the milk tank has flushed through, turn the control lever to the OFF
position ( ). A small amount of water will continue to be dispensed. Remove and
empty the cup.
Your Breville Moments
8
hot drink maker is now clean and ready for use.
™
t
y