Whirlpool 3XARG458GD00 Repair Manual page 13

I
AUTOMATIC ICE MAKER
I
To remove the bin
1. Pull the covering panel out from the bottom
and slide it to the rear.
i
e
I-=r
2. Lift the signal arm to the OFF position. Ice
can still be dispensed, but no more will be
made.
3. Lift the front of the bin and pull It out.
4. Empty the btn. Use warm or lukewarm water
to melt the ice If necessary. Do not use sharp
tools to break up the Ice In the bin This can
damage the bin and the dispenser
mechanism.
5 Wash followrng the Instructions given under
chapter "Maintenance and Cleaning". Rinse
well. Do not use abrasive cleaners or
solvents.
6. When putting the brn back, make sure It is
pushed all the way in. Push the signal arm
down to the ON position to restart ice cubes
productron.
To turn the night light on, slide the LIGHT switch
to the left.