Table of contents Package Contents Description of the tablet Replacing the battery Inserting mini SIM & Micro-SD cards Windows Getting started Connecting to a WiFi Getting familiar with Windows 10 The Windows 10 interface Windows notification center Android Getting started 4G &...
Package Contents Check your product box for the following items: - 10.1“ Rugged tablet with hand strap and battery - Active Stylus pen - Battery for stylus pen - Micro USB cable - USB host cable - AC adapter with EU, UK and US plug The items supplied with your device and available accessories may vary depending on your region or service provider.
Replacing the battery WARNING: Make sure to turn off your Fieldbook before removing the battery. Removing the battery 1. Unscrew the six battery cover screws on the back of the tablet. 2. Lift up the cover using the opening above the RFID reading area. 3.
Page 9
Replacing the battery Inserting the battery 1. Insert the battery with the contact side first into the battery compartment and slide the battery to the end (Picture 8.3) 2. Push down the other side of the battery (Picture 9.1 ) and close the two battery latches (Picture 9.1 3.
Inserting mini SIM & Micro-SD cards WARNING: Make sure to turn off your device before inserting a SIM or memory card. To install or remove a SIM or SD card, the battery has to be removed first. Please refer to “Removing the battery” on page 8. Inserting the mini SIM card The slot accepts only mini SIM cards.
Windows // Getting started Turn ON 1. Press and hold the ON/OFF button to turn on the device. Turn OFF 1. Click on the Windows symbol on the lower left corner of the screen. 2. Select the Power button , then select Shut down. Initial setup The first time you start up your device, the Windows Startup Screen will be the first screen displayed.
Page 13
Windows // Getting started Microsoft account A Microsoft account is an email address and password that you use to sign in to Windows. It’s free and easy to set up, and you can do so with any email address you choose, or get a new email address (for example, you can use an Outlook.com, Gmail, or Yahoo! address for your Microsoft account.).
Windows // Connecting to a WiFi network Make sure that you are in a WiFi zone. 1. Click on the arrow on the lower right corner and select the WiFi icon . 2. Select the name of network you want to connect to, tap on Connect and enter a password if required.
Windows // Getting familiar with Windows 10 Turning the device off In Shut Down Mode, no data will be saved and the tablet will boot to the operating system’s main screen the next time it is turned on. If you have entered data, either save it to the internal storage or to other storage media.
Windows // The Windows 10 interface Start Screen Slide to the right The “Start” screen is the Slide from the left side of the launching pad to access your screen to the right to open the favourite apps and websites running programs with only one click.
Page 17
Windows // The Windows 10 interface Slide to the left Slide down Slide from the right side of Slide down from the upper the screen to the left to open side of the screen while a the notification center window is open. You can then place the window on either side to start the split screen.
Windows // Windows notification center Click the icon in lower right corner of the screen to display the notification center. 1 - To change from PC mode to tablet mode 2 - To turn on/off the screen rotation 3 - To take notes 4 - To access all settings 5 - To connect other devices 6 - To manage the device’s battery...
Android // Getting started Turn ON 1. Press and hold the ON/OFF button to turn on the device. When you turn on your device, a PIN code may be requested. 2. Type the PIN code supplied with your SIM card. Beware of typing a wrong PIN code.
Page 20
Android // Getting started Through the wizard The first time you start up your Fieldbook, the installation wizard will help you set up your device: - Language - Date & time - WiFi connection - Location service options Touch screen actions: Tap: Touch once to select or launch a menu, option, or application.
Android // 4G & WiFi connections 4G connection With your SIM card, you should be connected to the Internet without any further setup. The Fieldbook will only have signal if you are in an area covered by your provider’s network. When connected to the 4G network, the 4G icon is displayed in the status bar. Activating the mobile data To be able to access Internet, mobile data must be activated.
Android // 4G & WiFi connections WiFi connection Make sure that you are in a WiFi zone. You can access the WiFi settings quickly from the status bar. 1. Drag down the status bar. 2. The status dashboard is displayed. 3.
Android // Google & Contacts Adding a Google account A Google account lets you take full advantage of Google apps and services 1. Go to “Settings” > “Accounts” > “Add account”. 2. Select the account type “Google” to add. 3. Follow the onscreen instructions to enter information about the account. Once the account is created, you can access Play Store, Gmail, Hangouts, Maps and many other apps.
Page 24
Android // Google & Contacts Saving your contacts When your contacts are saved, they are always available on the web and can be synced to any Android phone that’s set up with your Google account. 1. Install the SIM card with your contacts in your phone. 2.
Android // Hints & tips The extended home screen: Navigate between different home screen panels by swiping left and right. Home button Short press the Home button to go back to the main screen. Tap and hold the Home button to display all the apps you have opened. Swipe any app left or right to close it.
Page 26
Android // Hints & tips Widgets: Tap the “Menu” button > tap “Widgets”. From the main Widget screen, you can move around widgets just as you do for app icons. Changing your wallpaper: Tap the “Menu” button > tap “Wallpapers”. Locking the touchscreen: From the quick settings dashboard in the status bar, touch “Settings”.
Windows operating instructions of special function module 1. U-blox GPS (1). The software bundled with this (2). Use power control tool and make it power on. product includes software files subject to certain open .
Page 28
Windows operating instructions of special function module (3). Open the software, chose receiver, (5). As below picture, double click and chose port again, click COM1. the satellites model picture to enlarge. (4). In the same way for receiver, chose Baudrate, click 9600.
Page 29
Windows operating instructions of special function module (6). The blue colors are the satellites that searched, green color are effective satellites. The numbers in the right are signal value. Standard: Enviroment: in open field, no metal in around, no obstacles. Sunny weather, no clouds covering.
Page 30
Windows operating instructions of special function module 2. 1D module operation (1). Copy the serial assistant ( SPU) (2). Use power control tool and on the desktop. make it power on. (4). Click start key, press the (3). Install the opened software, chose corresponding serial port, Baud rate scanner key on the PAD and start chose 9600.
Page 31
Windows operating instructions of special function module (5). Ok ! after scan successful, the result will show on the frame automatically.
Page 32
Windows operating instructions of special function module 3. 2D module operation (1). Use power control tool and make It power on. (2). Create a text document.
Page 33
Windows operating instructions of special function module (3). Open the text document, click the blank place, press the scan key on the PAD and start to scan. (4). The result of scanner will show automatically.
Android operating instructions of special function module (note: please allow installation of unknow source before software installation) Check: setting—security- unknown source.
Page 35
Android operating instructions of special function module 1. NFC Module operation (1). Copy NFC testing software on the local. (2). Click install, and open. (3). Put NFC card on the induction area. (4).OK! Read information, OK! Standard :...
Page 36
Android operating instructions of special function module 2. GPS Module operation (1). Copy GPS testing software on the local. (2). Click install, and open. (3). See the GPS status shows off on the top left corner. Click off and enter into set interface.
Page 37
Android operating instructions of special function module (4).open the switch on the top right (5). Chose mode, click device only. corner, and chose agree again. (6).Finally return GPS main interface. Can see GPS Status shows on.
Page 38
Android operating instructions of special function module (8). OK! wait for 3 mins and check (7).In open field and waiting for 1min and check if there is a satellite. if satellites value, quantity meet standard. Standard: Enviroment: in open field, no metal in around, no obstacles. Sunny weather, no clouds covering.
Page 39
Android operating instructions of special function module 3. 1D Module operation open testing software will have operating instruction as below:...
Page 40
Android operating instructions of special function module (1). Copy scan testing software to (2). Click install, and open. local. (3). Chose ttyUSB0 on the serial (4). Click Serial port operation open options, press Scan key on Pad to port node, chose 9600 or 115200 on Baud rate options, shows HEX.
Page 41
Android operating instructions of special function module 4. 2D Module operation (1). Copy scan code testing software (2). Click install, and open. to local. (3). Click the frame in the below, press the scan key and aim at the barcode which need to scan.
Page 42
Android operating instructions of special function module (5). also can press scanner key to (6). If scanner can not work, you scan directly and will show as below. can try scan the below USB switch code.
Product accessories Strap Shoulder girdle Hand writing pen Battery Charging docking Hand split Europe standard adaptor three-in-one adaptor US standard adaptor...
Page 44
Product accessories Car charger Straps Car holder Bracket 1 Bracket 2 Bracket 3...