Base Stand Assembly Instruction - Haier LE55U6500U Instruction Manual

Introduction

Base Stand Assembly Instruction

1. Place the panel side of TV on the platform
and insert the two stands into TV, making the
screws holes of stands correspond to the right
holes of TV.
INSTALLATION NOTES
Locate the TV in a room where light does not strike the screen directly. Total darkness or a
reflection on the screen can cause eyestrain. Soft and indirect lighting is recommended for
comfortable viewing.
Allow enough space between the TV and the wall to permit ventilation.
Please do not attempt to rotate the TV on the stand.
Avoid excessively warm locations to prevent possible damage to the cabinet or premature
component failure.
EN-7
2. Fix screws on the bottom of back cover, one
for each side, assembly finished.
M4X14MM