Subscribe to Our Youtube Channel
Summary of Contents for Technical Pro MM2000BT
- Page 1 Technical Pro Professional Karaoke Amplifier with USB & SD Card & Bluetooth Inputs User Manual for: MM2000BT...
- Page 2 , it is recommended that you review all of the information provided in this instruction manual before operating this equipment. If you've spent any time at all in professional audio, you know the name Technical Pro and what it stands for — incredible performance &...
-
Page 3: Front Panel
MM2000BT MM2000BT Front Panel 9 8 7 6 5 29 30 31 32 33 34 35 36 37 38 39 25 26 1.Power Button: Press this button to power the unit on and off. 2.MP3(1/8”) Input: Connect your MP3 player or computer here.Make sure to press the input selector button (7) until “MP3”... - Page 4 25.MIC 1 & MIC 2 Volume Control: Use this knob to adjust the volume of MIC 1 & MIC 2. 26.Bluetooth Indicator: This Bluetooth indicator will remain illuminated when there is a Bluetooth device connected to the MM2000BT. It will turn off if there is no Bluetooth connection. 27.Microphone Inputs: Microphone Inputs ¼".
- Page 5 3.Group B Main Speakers: Connect your main speakers to these speaker outputs. The unit should be powered off and volume levels turned down when making these connections. THE MM2000BT OPERATE MOST EFFICIENTLY WHEN USED WITH 8 OHM SPEAKERS. 4.Group A Main Speakers: Connect your main speakers to these speaker outputs. The unit should be powered off and volume levels turned down when making these connections.
-
Page 6: Tape Recorder
The Loop Output is connected to an equalizer which will has the signal processed and send back to the MM2000BT via Loop Input. If there is no equalizer needed, you can also Loop IN / Out EQ Plugs provided with the unit. - Page 7 Connecting the EQ plugs to the MM2000BT’s Loop Input & output The Loop Input & Output jackes on the rear panel of MM2000BT are for equalizer. The Loop Input should be connected to the output of the equalizer and the Loop Output should be connected to the input of this same equalizer.
- Page 8 Nano) There are also SD Card and USB flash drive inputs on the front panel of the MM2000BT which is compatible with iPod™ (Classic and Nano) via the USB input. The maximum size of the SD Card or USB flash drive is 32GB. If your memory card exceeds 32GB, the unit will not be able to read the files from the memory cards.
-
Page 9: Ac Power Cord Connection
CD player (other sound sources) to the unit, make sure that the CD player has a RCA cord coming from its output and that this cord is plugging into the RCA Input on the rear of the MM2000BT. NOTE: BE SURE NOT TO CONNECT AN AMPLIFIER OR ANY AMPLIFIER SIGNAL INTO THE RCA INPUT JACKS. -
Page 10: Screen Display
This will display when the unit is playing FM tuner and station frequency is 98.3MHz. The Bluetooth word mark and logos are registered trademarks owned by SIG, Inc. and any use of such marks by Technical Pro is under license. Other trademarks and trade name are those of their respective owners.
Need help?
Do you have a question about the MM2000BT and is the answer not in the manual?
Questions and answers
comment se connecter avec speaker bluetooth (comment apairer speaker bluetooth
@michel comment se connecter avec haut-parleur bluetooth (comment apairer haut-parleur bluetooth
To connect speakers to the Technical Pro MM2000BT:
1. Turn off the MM2000BT and the signal source. Set volume levels to low.
2. Strip about 10 mm (0.4 in) of insulation from each speaker wire and twist the exposed strands.
3. Unscrew the main speaker output terminals on the rear of the MM2000BT.
4. Insert the exposed wire into the terminal opening.
5. Tighten the terminal knob to secure the wire.
If not using an external equalizer, make sure the provided EQ plugs are inserted into both the Loop Input and Loop Output jacks. Without them, no audio will come from the speakers.
This answer is automatically generated