Connecting To A Macintosh; Connecting The Camera And A Macintosh - Pentax X70 Operating Manual

Connecting to a Macintosh

Connecting the Camera and a Macintosh

Connect your camera to the Macintosh using the provided USB cable
(I-USB7).
1
Turn your Macintosh on.
2
Turn your camera off.
3
Connect your camera to the Macintosh using the USB
cable.
Connect the terminal of the USB cable with
on the PC/AV terminal on the side of the camera.
8
4
Turn your camera on.
The camera is recognized as [NO_NAME] on the
desktop.
• If the SD Memory Card has a volume label, the volume label name
appears instead of [NO_NAME]. A new unformatted SD Memory Card
may show the manufacturer name or model number.
• The power lamp is lit while the camera is connected to a Macintosh,
whereas it blinks while the card is being accessed.
234
pointing toward the 4