Advertisement
Never put the blade on the
motor base directly when
use.
Never put the hot ingredients
℃
(above 65
Please remove all hard ker-
nels from the fruit before
blending.
There is overheat protection
system in the motor, it will
work if the motor is over-
heated. You should turn off
the power at this time and
wait the machine to cool
down completely.
Regarding the instructions
for cleaning the surfaces
which come in contact with
food, speed settings and op-
erating time, please refer to
the below paragraph of the
manual.
) into the cups.
Using the Appliance
Caution: Make sure the motor base is
unplugged from the power source.
1. Place the motor base on a firm, flat,
level surface.
2. Fill the blending cup with your in-
gredients and connect with the
cross blade for blending purpose.
Alternatively, fill the grinding cup with
your ingredients and connect with the
flat blade for grinding purpose.
Rotate the blade base on to the cup
tightly in clockwise direction. Do not
exceed the "MAX" level on the cup.
3. To attach the cup to the motor unit,
gently push down and rotate the
cup in a clockwise direction. Make
sure the cup is locked firmly.
4. Plug in the appliance.
5. Press the "ON/OFF" button to turn
on the unit. Press the "LOW-HIGH"
button once, the appliance starts
working at low speed. Press it
again, the appliance will work at
high speed.
6. If you wish to use pulse function
during
operation,
"PULSE" button once to run this
function. The appliance will run for
2 seconds and then stop, wait until
the blade has fully stopped before
pressing again. Repeat if needed.
press
the
Advertisement
