Table of Contents
Advertisement
Owner's Manual & Safety Instructions
Save This Manual
operating, inspection, maintenance and cleaning procedures� Write the product's serial number in the
back of the manual near the assembly diagram (or month and year of purchase if product has no number)�
Keep this manual and the receipt in a safe and dry place for future reference�
email our technical support at: productsupport@harborfreight.com
When unpacking, make sure that the product is intact
and undamaged� If any parts are missing or broken,
please call 1-888-866-5797 as soon as possible�
©
Copyright
2016 by Harbor Freight Tools
No portion of this manual or any artwork contained herein may be reproduced in
any shape or form without the express written consent of Harbor Freight Tools�
Diagrams within this manual may not be drawn proportionally� Due to continuing
improvements, actual product may differ slightly from the product described herein�
Tools required for assembly and service may not be included�
Keep this manual for the safety warnings and precautions, assembly,
Visit our website at: http://www.harborfreight.com
®
� All rights reserved�
read this material before using this product.
Failure to do so can result in serious injury.
SaVe tHiS ManuaL.
reV 16h
Advertisement
Table of Contents
Related Manuals for Lynxx 63289
Summary of Contents for Lynxx 63289
- Page 1 Owner’s Manual & Safety Instructions Save This Manual Keep this manual for the safety warnings and precautions, assembly, operating, inspection, maintenance and cleaning procedures� Write the product’s serial number in the back of the manual near the assembly diagram (or month and year of purchase if product has no number)� Keep this manual and the receipt in a safe and dry place for future reference�...
-
Page 2: Table Of Contents
13� Store idle appliances indoors - When not in use, work boots to help prevent injury appliances should be stored indoors in dry, and caused by flying debris. high or locked-up place - out of reach of children� Page 2 For technical questions, please call 1-888-866-5797. Item 63289... -
Page 3: Safety
6� Remove or disconnect battery after use, contains important safety and operating before servicing, cleaning or removing instruction for battery charger Model 63289� material from the gardening appliance� 2� Before using battery charger, read all instructions 7� Do not dispose of battery in a fire� The and cautionary markings on battery charger, cell may explode�... -
Page 4: Save These Instructions
State of California to cause cancer, and birth defects or other reproductive harm� Wash hands after handling� (California Health & Safety Code § 25249�5, et seq.) SaVe tHeSe inStructiOnS. Page 4 For technical questions, please call 1-888-866-5797. Item 63289... -
Page 5: Specifications
0 xxxx/min� No Load Revolutions per Minute (RPM) WARNING marking concerning Risk of Eye Injury� Wear ANSI-approved safety goggles with side shields� Read the manual before set-up and/or use� Item 63289 For technical questions, please call 1-888-866-5797. Page 5... -
Page 6: Setup
Functions Spool Storage compartment trigger Safety Lock trigger auxiliary Handle extension Lock extension edger/trimmer tube Button Head angle Button Line Guard cutter Spool Housing edger Wheels edge Guide not shown. Page 6 For technical questions, please call 1-888-866-5797. Item 63289... - Page 7 • three Solid Green Lights - 75% charge� • two Solid Green Lights - 50% charge� • One Solid Green Light - 25% charge • One Blinking Green Light - Charge Battery� Item 63289 For technical questions, please call 1-888-866-5797. Page 7...
- Page 8 Handle Bracket until it clicks into place� Bracket Handle 2� To change Auxiliary Handle position, move Auxiliary Handle Lock up, change handle position, then move Auxiliary Handle Lock down� auxiliary Handle Lock Page 8 For technical questions, please call 1-888-866-5797. Item 63289...
- Page 9 Wheels 1� Slide Edger Wheels into slot� Push down until Edger Wheels lock into place� 2� Remove Edger Wheels by pushing Tab and pulling up on Edger Wheels� Slot Item 63289 For technical questions, please call 1-888-866-5797. Page 9...
-
Page 10: Operation
1� To install: Slide Battery Pack into slot on back release of String Trimmer until it clicks into place� Buttons 2� To remove: Press both Battery Pack Release Buttons and pull Battery Pack out of slot� Battery pack Page 10 For technical questions, please call 1-888-866-5797. Item 63289... -
Page 11: Trimmer Operation
• Remove battery pack� • Wipe external surfaces of the appliance 6� Install fully charged Battery Pack� with clean cloth� Store in an indoor dry area out of reach of children� Item 63289 For technical questions, please call 1-888-866-5797. Page 11... -
Page 12: Maintenance
4� Clean interior of Spool Housing with soft cloth� cover 5� Replace Spool, insert Line through Line Outlet in Line Spool Housing and pull line out past Line Cutter� cutter tabs 6� Replace Spool Cover� Page 12 For technical questions, please call 1-888-866-5797. Item 63289... - Page 13 Spool Housing Spool Spool 7� Replace Spool, insert Line through Line Outlet in cover Spool Housing and pull line out past Line Cutter� Line cutter tabs 8� Replace Spool Cover� Item 63289 For technical questions, please call 1-888-866-5797. Page 13...
-
Page 14: Parts List And Diagram
If product has no serial number, record month and year of purchase instead� note: Some parts are listed and shown for illustration purposes only, and are not available individually as replacement parts� Page 14 For technical questions, please call 1-888-866-5797. Item 63289... - Page 15 Diagram Item 63289 For technical questions, please call 1-888-866-5797. Page 15...
-
Page 16: Warranty
Limited 90 Day Warranty Harbor Freight Tools Co� makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of 90 days from the date of purchase�...
Need help?
Do you have a question about the 63289 and is the answer not in the manual?
Questions and answers
how to remove trimmer line back "basket" / the actual spool holder
To remove the spool holder on a Lynxx trimmer (part number 63289), follow these steps:
1. Remove the Battery Pack.
2. Press the tabs on the Spool Cover.
3. Remove the Spool Cover and Housing.
4. Pull the Spool out from the Spool Housing.
This will give you access to the spool holder for maintenance or replacement.
This answer is automatically generated
My weed trimmer is not feeding the cord. It the spool stops spinning before more cord is dispensed.
The cord may not be feeding on the Lynxx weed trimmer (part number 63289) because the spool may be tangled. To fix this, remove the spool and rewind the line. Also, do not bump the spool housing on the ground, as this trimmer advances the line automatically when the trigger is released.
This answer is automatically generated
where can i obtain the spool cover ?
You can find a spool cover for Lynxx part number 63289 in the Spool Storage Compartment of the trimmer.
This answer is automatically generated
How to remove the spool housing?