Table of Contents
Advertisement
Quick Links
Golzer NFC Bluetooth stereo receiver
GBAR-30
Model No.:
Introduction
With the stereo Bluetooth receiver GBAR-30, you can control incoming and outgoing
phone calls while you listen to music in stereo from your phone or from another
device. Such a device must support Bluetooth, for example, a computer or a portable
music player. During a call, the music pauses automatically and starts playing again
when the call ends.
Advertisement
Table of Contents
Summary of Contents for Golzer GBAR-30
- Page 1 Model No.: Introduction With the stereo Bluetooth receiver GBAR-30, you can control incoming and outgoing phone calls while you listen to music in stereo from your phone or from another device. Such a device must support Bluetooth, for example, a computer or a portable music player.
- Page 2 Swipe this area during NFC transactions. Charging the battery Before using the Stereo Bluetooth Receiver GBAR-30 for the first time, you need to charge the receiver for 2-3 hours with the included micro USB charging cable. To charge the battery 1.
- Page 3 3. Plug the other end of the cable into the Micro USB port on your Stereo Bluetooth Receiver GBAR-30 device. Note: The LED indicator keeps in red when charging and it will turn off when GBAR-30 is fully charged. Turning on / off the receiver To turn on the receiver Insert the earphone into 3.5mm jack and then press and hold button (3) until the LED...
- Page 4 2. GBAR-30 will automatically turn off if no paired device is in range for 5 minutes. 3. All the pairing information will be stored even after the power is turned off.
- Page 5 Quick double press and release the button (3) to redial the last number dia.hjv.jvled. (6) To transfer a call Press and hold the button (3) for 3 seconds during a call to transfer a call to mobile phone. And repeat above procedure to transfer the call from mobile phone to the receiver.
Need help?
Do you have a question about the GBAR-30 and is the answer not in the manual?
Questions and answers