Philips 192E2SB2/10 Service Manual page 66

66 192E2SB2 LCD
3.14.1.6
A. Standard
B. Internet
i. Purpose: Design for Internet application, especially web browsing.
ii. Enhancement Point:
C. Game
i. Purpose: Design for PC game software and game boxes, e.g. PS3 and Xbox. The
ii. Enhancement Point:
2010/08/19
General Product Specification
Profile Definitions (system integrators to input at design stages)
i. Purpose: Default out of box settings, No optimization by SmartImage.
ii. Design:
1. This will follow user OSD setting. If any change by user, it will be saved.
When switch back from other SmartImage profiles, it will go back to last saved
setting.
2. Default out of box settings.
3. Same as OFF mode settings in SmartImage.
The screen is mixed by text & picture. Desktop publish could use this profile also.
1. The enhancement will be mostly based on the "Image viewing" settings that
are also under definition, made milder by the higher probability of strong
compression typical of the Internet photos and clips.
2. Color temperature should be 6500° K.
3. Brightness level should be around 90%
4. SmartResponse set to "Low".
5. Smart Contrast set to "Off".
screen is dominated by artificial animation with rich color.
1. Dynamic contrast enhancement by histogram analysis should be
implemented.
2. Sharpness enhanced 90%.
3. Color enhancement set as the same with Video.
4. Color temperature set to panel native(original color temp).
5. Brightness level sets to maximum
6. SmartResponse set to "High".
7. Gamma Table turn off to achieve fastest response time.
8. SmartContrast set to "On".
192E2SB2
PHILIPS
18.5" Wide WXGA LCD Monitor
14 of 26