Pentax Optio W30 Operating Manual page 67

3
Press the shutter release button fully.
The picture is taken.
• If any other functions have been assigned to the Green button, the
menus appear in sequence each time the button is pressed. (p.59)
• In Green Mode, you cannot change the information displayed on
the LCD monitor by pressing the 4/W button.
• You cannot use the [A Rec.Mode] menu or Capture
Mode Palette in Green Mode. If you try to display the
[A Rec.Mode] menu or Capture Mode Palette, -
(key lock icon) appears.
• If you switched to Q mode from Green Mode, you
cannot display the [H Setting] menu by pressing the
3 button. If you try to display the [H Setting] menu, - (key
lock icon) appears.
• When the camera is turned off in the Green Mode, it turns on in the
Green Mode next time the power switch is pressed.
* The Green Mode settings are as shown below.
Flash Mode
Drive Mode
Focus Mode
Information Display
Recorded Pixels
Quality Level
White Balance
AE Metering
Focusing Area
Focus Limiter
Sensitivity
EV Compensation
Digital Zoom
Instant Review
Sharpness
Saturation
Contrast
, (Auto)
9 (Standard)
= (Standard)
Normal
6
D (Better)
F (Auto)
L Multi-segment metering
J (Multiple)
O (On)
Auto 64-400
±0.0
O (On)
1sec
G (Normal)
G (Normal)
G (Normal)
38 38 38
Green mode must
be canceled to use
this function.
Key lock icon
4
65