Pentax Optio S50 Operating Manual page 131

Problem Cause
Subject is not in Subject difficult to focus
focus on
Subject is not in focusing
area
Subject is too close
Focus mode is set on
q (Macro) or r (Super
Macro)
Flash does not Flash mode is set to Off Set to Auto or b. (p.63)
discharge
The Capture mode is set
to C or J in d mode,
Continuous Shooting or
Infinity-Landscape
mode.
Zoom will not Focus mode is set on
work Super Macro
Remedy
Subjects difficult to focus on using
autofocus: objects with little contrast (blue
sky, white walls, etc.), dark objects, finely
patterned objects, fast-moving objects,
scenery through window or net, etc. Lock
focus on another object located at same
distance (press shutter release button
halfway), then aim at target and press
shutter release button fully, or use Manual
Focus mode.
Position subject in focus frame (focusing
area) in middle of LCD monitor. If the
subject is outside the focusing area, aim
the camera at the subject and lock the
focus (press shutter release button
halfway), then compose picture and press
the shutter release button fully.
Set focus mode on q (Macro) or
r (Super Macro). (p.61)
Normal pictures will be out of focus if
taken with focus mode set on q (Macro)
or r (Super Macro).
Flash will not discharge in these modes.
Zoom does not function in Super Macro
mode.
8
129