Download Print this page

More Information - Glyph ForteRAID Manual

4-drive raid array with firewire 800 and 400, usb 2.0 and esata

Advertisement

More Information

ForteRAID Features
Removable drives in case of failure.
SATA II 3.0Gb/s drives.
RAID controller built into enclosure - no special RAID card needed.
Engineered to support professional content creation applications
Supports software-selectable drive modes: RAID 0, 1, 3, 5, and Spanning.
230MB/sec sustained transfer rate over eSATA.
Internal power supply, no wall wart, internal quiet fan.
Glyph Manager software for configuring unit, runs on Mac and PC.
Glyph Manager reports RAID array health status, RAID level, enclosure temp, drive health and temperature.
ForteRAID Specifications
Part Number
Interfaces
Bridging Chip
Maximum Transfer Rate
Sustained Transfer Rate
Dimensions
Configuration
Weight
Internal Power Supply
Mac OS Compatibility
PC Compatibility
Warranty
*While Glyph is not obligated to recover lost data, we always give it our best effort. Nonetheless, we can't guaran-
tee we'll always be successful.
FTRD-x (x is equal to total capacity)
(2) 9-pin FW800 rear ports
(1) 6-pin FW400 rear port
(1) eSATA rear port
(1) USB 2.0 Hi-speed rear port
Oxford 936
eSATA: 300MB/sec (3Gb/sec)
eSATA: >230MB/sec
H 7" x W 5.3" x D 9.6"
Desktop enclosure
8.6 lb. / 3.9 kg
Universal 100-240v 50/60 Hz
Minimum PowerPC G4 Processor, 128MB RAM
eSATA interface, Mac OS X 10.3 or later
FireWire interface, Mac OS X 10.2 or later
USB 2.0 interface, Mac OS X 10.2 or later
Minimum 500MHz Intel Pentium 3 Processor, 128MB RAM
eSATA interface, Windows XP / Vista / Windows 7
FireWire interface, Windows 2000 / XP / Vista / Windows 7
USB 2.0 interface, Windows 2000 / XP / Vista / Windows 7
3 Years
1 Year Advance Replacement on removable drives (US 48 States Only)
2 Years Free Basic Data Recovery*
18

Advertisement

loading