To start any test:
•
Position the cursor on the Test Tag you want.
•
Press the Enter key.
•
Go to the documentation in this section that
describes the test you have chosen to run.
Note: If you are going to run the Modem Test,
disconnect your modem from the telephone jack,
before pressing enter.
Note: If you are going to run the Sound Test, read
the first page of "Test Tag 9 - Sound Test"in this
Section, before pressing enter.
For example:
•
Move the cursor to Test Tag G.
•
Before Pressing Enter, disconnect your modem
from your telephone jack.
•
Press the Enter key.
Go to "Test Tag G - IBM PC/r Internal Modem
Test" found in this section.
6-28 Running the IBM PC/#- Tests