Printing All Images - Pentax Optio S Operating Manual

e04_kb341_079_109_41e.qk 03.2.14
c
Use the four-way controller (
select the number of prints, then
press the four-way controller ( ).
The frame will move to [Date].
v
Use the four-way controller (
select whether to insert the date or
not.
(On) : The date will be imprinted
(Off) : The date will not be imprinted
b
Press the OK button.
Prints can be made according to the settings.
• If DPOF settings have already been made for an image, the
memo
previously set number of prints and On/Off date setting will
be displayed.
• To cancel DPOF settings, set the number of prints to 0 and
press the OK button.
• You cannot set the printing service for movie pictures or
Caution
sound-only files.
• Depending on the printer or printing equipment at the
photo processing lab., the date may not be imprinted on
the pictures even if the DPOF setting was made.
• DPOF settings cannot be made on the images saved in
the Built-in memory. Copy them to the SD Memory Card/
MultiMediaCard (p.95) and make DPOF settings.
90
4:07 PM Page 90
) to
100-0020 100-0020
Copies 3
Date
) to
Exit Exit All Images All Images All Ima Ok Ok
MENU DISP OK

Printing All Images

z
Enter the Playback mode and press the four-way con-
troller ( ).
x
Press the Display button.
c
Use the four-way controller (
select the number of prints.
You can print up to 99 copies.
v
Press the four-way controller ( ).
The frame will move to [Date].
b
Use the four-way controller (
[Off].
(On): The date will be printed.
(Off): The date will not be printed.
n
Press the OK button.
Prints can be made according to the settings.
• The setting for a single image will be cancelled.
memo
• When you specify the number of prints in the DPOF setting,
the number applies to all the images. Before printing, check
that the number is correct.
• The setting is not possible for movie pictures.
zcvbn
x
100-0020 100-0020
) to
DPOF settings for all images
Copies 1
Date
MENU Exit Exit OK Ok Ok
) to select [On] or
91