Detaching The Arm/Stand (For Vesa Wall Mount) - Asus VS228D User Manual

2.1
The detachable stand of the VS228/VS238/VS247 Series LED monitor is
specially designed for VESA wall mount.
To detach the arm/stand:
1.
2.
3.
2-1
Downloaded from www.Manualslib.com
Detaching the arm/stand
(for VESA wall mount)
Disconnect power and signal cables. Carefully put the front of the
monitor face down on a clean table.
Use your fingers gently pull away the plate that covers the stand
neck. Use a screwdriver to remove the four screws that secure the
stand to the monitor.
Detach the stand from the monitor.
• W e recommend that you cover the table surface with soft cloth to
prevent damage to the monitor.
• H old the stand of the monitor while removing the screws.
• The VESA wall mount kit ( 100 x 100 mm) is purchased separately.
• Use only the UL Listed Wall Mount Bracket with minimum weight/
load according to the model listed in the specification table (Screw
size: M4 x 12 mm).
manuals search engine
Chapter 2: Setup