Samsung SCH-n330 Series User Manual page 44

Digit Dial
Digit Dial lets you dial any valid seven-digit or ten-digit
phone number by speaking the number naturally,
without pausing between digits.
Digit Dial Tips
•
Digit Dial works best in quieter environments.
•
When pronouncing a number, speak at a normal speed, saying
each digit clearly. There is no need to pause between digits.
•
Digit Dial recognizes the digits one, two, three, four, five, six,
seven, eight, nine, zero, and oh (zero). Your phone does not
recognize numbers such as "one eight hundred" for "1-800."
Instead, say "one eight zero zero," or "one eight oh oh."
•
Digit Dial recognizes only valid seven- or ten-digit North
American phone numbers, optionally preceded by the digit "1."
Note: If you are experiencing frequent problems getting Digit Dial to
recognize you, try adapting it to your voice, which can greatly improve
accuracy. See "Set Digits—Adapt Digits" on page 135 more information.
Using Digit Dial
1. In standby mode, press and hold the
Dialing command menu appears on the display, and the
phone prompts, "Say a command" followed by a single
beep.
2. Say "Digit Dial."
The command Digit Dial appears in the display and the
phone prompts, "Number please" followed by a beep.
44
key. The Voice