Download Print this page

INDCO TM Series Owner's Manual

Top entry mixers

Advertisement

Quick Links

TM & TMG
Series
Mixers
OWNERS
MANUAL
Warranty
Our products are guaranteed against
defective materials and workmanship, we will
repair or replace such items as may prove
defective at our option. Warranty period is
one year on items manufactured by INDCO.
On items not manufactured by INDCO, the
manufactures warranty applies.
component parts of our products are covered
by this warranty, except for normal wear items
such as belts or impellers. We cannot be
responsible for damage or abuse to equipment
caused by improper installation or operation.
Warranties can also be voided by
unauthorized disassembly of equipment. For
warranty repairs, equipment is returned to
INDCO at the customer's expense; we will
repair and return to customer at our expense.
Under no circumstances will we allow labor
charges or other expense to repair defective
merchandise. This warranty is exclusive and
is in lieu of all other warranties, whether
express or implied. INDCO shall not be liable
for
any
other
damages,
consequential, indirect, or incidental, arising
from the sale or use of its products.
INDCO, Inc.
M-M-30127 mixer manual TM(G)
Contents
Model Data .
Safety & General Info
Installation
Maintenance .
All
INDCO, Inc.
P.O. Box 589
New Albany, IN 47151
phone: 812-941-5954
whether
fax:
web:
TM(G) SERIES
TOP ENTRY MIXERS
.
.
.
.
.
.
.
.
812-944-9742
www.indco.com
date: 1/5/05
Page
.
.
.
.
.
.
.
.
.
.
.
.
page 1 of 8
2
3
4
6

Advertisement

loading
Need help?

Need help?

Do you have a question about the TM Series and is the answer not in the manual?

Questions and answers

Summary of Contents for INDCO TM Series

  • Page 1 P.O. Box 589 merchandise. This warranty is exclusive and New Albany, IN 47151 is in lieu of all other warranties, whether phone: 812-941-5954 express or implied. INDCO shall not be liable other damages, whether fax: 812-944-9742...
  • Page 2 RPM output: downward into tank 99” 300 - Shaft: Diameter 402 - Impeller, upper: Diameter Type 401 - Impeller, center: Diameter Type 402 - Impeller, lower: Diameter Type INDCO, Inc. M-M-30127 mixer manual TM(G) date: 1/5/05 page 2 of 8...
  • Page 3 Safety General Please read this complete manual before trying to install or INDCO’s TM series - top mounted heavy duty gear drive operate your mixer. mixers are designed for handling large volumes and are • High voltage and rotating equipment can cause serious the most common and most efficient mixer used in the or fatal injury.
  • Page 4 Tighten to about 200 inch pounds. Using the access hole in the flange, slide the coupling together and tighten the set screw. INDCO, Inc. M-M-30127 mixer manual TM(G) date: 1/5/05 page 4 of 8...
  • Page 5 The above guide-lines are “rules of thumb” and may not be the best for your situation. Experimenting with impeller placement may provide your best results. INDCO, Inc. M-M-30127 mixer manual TM(G) date: 1/5/05 page 5 of 8...
  • Page 6 1500 hours of operation to remove metal particles that accumulate during break-in. Subsequent oil changes should be made after 5000 hours operation if units are operating in a clean environment. INDCO, Inc. M-M-30127 mixer manual TM(G) date: 1/5/05 page 6 of 8...
  • Page 7 - Mobil SHC 629 -25 to +100 Mobil - Mobil SHC 626 -40 to +40 The SEGL lubricants are available from: New Age Chemical 3765 Kettle Court E. Delafield, WI 53018 INDCO, Inc. M-M-30127 mixer manual TM(G) date: 1/5/05 page 7 of 8...
  • Page 8 90°F. For units operating in ambient temperatures normally between 80°F to 125°F, Mobil 600W super cylinder oil or equivalent AGMA 8 or 8EP lubricant is recommended. INDCO, Inc. M-M-30127 mixer manual TM(G) date: 1/5/05 page 8 of 8...

This manual is also suitable for:

Tmg series