Maintenance And Cleaning - NGS sixinone Instruction Manual

Maintenance and Cleaning

• Do not use water or any other liquid to clean the hair cutter.
• Always switch off the hair cutter (off position) before cleaning.
• Never use alcohol or abrasive products. Do not use hair gel,
grease or oil that have been mixed with solvents.
• Never clean, change or substitute headers with the device in
operation (on position).
• Do not apply pressure to blades.
• Do not touch blades with hard or blunt objects that may damage
them.
• Do not use the device while bathing or in the shower or put the
device in water or other liquid.
• Regular cleaning guarantee optimal operation and long useful
life.
Cleaning during usage:
• Shake the device or blow to remove hair from the upper part. If
a lot of hair has accumulated around the comb use the cleaning
brush (accessory J) and remove the hairs by shaking or blowing
on it.
Cleaning once a week:
• Ensure the device is switched off (off position) and disconnected
from the power socket.
• Separate the cutter guide or other header inserted in the hair
cutter.
• Also separate the upper part of the microshaver (fig 26), blowing
or shaking out any hair that may be in it.
• Do not clean the shaving blade with the cleaner brush, it is
very delicate and could be damaged; furthermore do not apply
pressure on it and if damaged it must be replaced.
EN
FR
ES
DE
IT
P