Maintenance And Storage; Cleaning The Device - OT Bioelettronica Quattro User Manual

4-channel surface electromyographic (emg) device
Hide thumbs Also See for Quattro:
Table of Contents

Advertisement

OT Bioelettronica snc
9. QUATTRO MAINTENANCE AND STORAGE
Quattro has to be used, transported and stored in the following conditions:
Temperature:
Maximum relative humidity:
Atmospheric pressure:
It is recommended to turn off the Quattro at the end of every session.
The Quattro should be stored with all the enclosed accessories on a safe place far from all
conditions described in the Warnings section of this manual. The Quattro does not need
any particular maintenance procedure to work. To maintain the battery efficiency, recharge
the device before every use and check regularly the efficiency status of the battery.
If during the use and after the battery charging the battery lasts less than 1 hour,
contact the manufacturer to check the electrical source itself.
Cleaning the device: At the end of every use, please clean the Quattro with a clean cloth.
Do not clean the Quattro using acetone, ether, freon, oil products or any other
solvent;
Do not use soap or water on the connectors pin contacts.
Do not clean the Quattro or its cables with water, in autoclave or with steam
cleaning.
WARNING: clean electrodes adapter cable only with hospital disinfectants before
every use to avoid microbial contamination between patients and healthcare professionals.
v1.2 – Ed. 07/2014
User Manual
from 10°C to +40°C
from 30% to 75%
from 700 hPa to 1060 hPa
Pag. 13/17

Advertisement

Table of Contents
loading

Table of Contents