Do you have a question about the APU2 and is the answer not in the manual?
Questions and answers
Subscribe to Our Youtube Channel
Summary of Contents for Amina APU2
Page 1
User Guide APU2 High Pass Filter Unit V1.1 May 201 1...
Page 2
IMPORTANT: > Ensure that the APU2 is set for the correct model of AIWX series loudspeaker. Failure to do so may result in speaker damage. See the label on the underside of the APU2 for model designation. > NEVER connect more than one AIWX loudspeaker to each output channel.
Page 3
APU2: Positioning > The APU2 is designed to be free-standing or permanently fixed to a suitable structure using the two mounting holes. > The APU2 does not require ventilation and therefore its installation position is not critical. However, the product should ALWAYS be installed in a dry environment that will not exceed 35 degrees Centigrade (95 degrees Fahrenheit).
Page 4
T o change the jumpers, the APU2 housing must be opened by carefully unscrewing the four screws on the underside of the unit. These are located on the base of the APU2. The jumpers (J1, J2 and J3) for each channel are positioned as indicated in the below...
Page 5
APU2: Connecting APU2 wiring schematic Stereo Amplifier AIWX AIWX Series Series APU2 Note: Red levers on the Springcon® plugs are used for the “+” loudspeaker connections. Black levers on the Springcon® plugs are used for the “-” loudspeaker connections. Springcon® plugs connection...
Page 6
AIWX connected Fuse protection Self-resetting, current sensing type. Fuse threshold set via internal jumpers Compatability Suitable for use with Amina AIW1X, AIW2X, AIW3X, AIW4X and AIW5X only Number of channels Connection type 1x Springcon® 4 pole connector per channel (supplied). Connector...
Need help?
Do you have a question about the APU2 and is the answer not in the manual?
Questions and answers