F8 - Automatic Add to Totalizer................. 9 F9 - Automatic Coin Cup Tare ................... 9 F10 - Maximum Bill Prompt ..................9 RS-232C Connection......................9 MC-2000 Specifications......................10 Physical Dimensions ......................10 Thirty (30) Day Money Back Guarantee Information ............... 11 Warranty Replacement Information ..................11 Information in this document is subject to change without notice.
þ Locate the platform and affix to the scale in the holes provided. Be sure to align the end marked “FRONT” with the front of the scale. Firmly squeeze the platter into place. þ Plug the enclosed AC Adapter into the MC-2000 first, then into an AC outlet. (Or install 6 each al- kaline batteries.) þ...
Press & hold Clear, then press TOTAL to momentarily display & print total. This will also clear accumulator to 0. Turns MC-2000 ON & OFF. (Turning power off will clear totalizer memory.) (No need to turn MC-2000 off when using AC adapter.) MC-2000, Version 2.6...
$1 coins, press BILLS or ENTER (with nothing on platform) to move to $1 bill mode. Annunciators tell you which mode you are in. TIP #2: MC-2000 should be used on a solid table surface with all leveling legs secure (so unit doesn’t “teeter”). Avoid heavy air drafts and table vibrations.
Maximizing Money Count Performance Environment The MC-2000 is calibrated & ready for use when unpacked. Always follow the instructions in “Getting Started” Section on page 2. Money Count Accuracy Silver Coins: nickels, dimes & quarters (loose or rolls) are no problem in any environment.
Setup Functions Your MC-2000 is basically ready to use right out of the box. There are, however, certain user setup & support functions which allow adjustments best suited to your personal needs: WE STRONGLY RECOMMEND YOU USE YOUR MC-2000 FOR A FEW DAYS, BEFORE YOU DECIDE TO CHANGE ANY FACTORY SETTINGS.
4. To return to weighing mode, turn MC-2000 off, then turn back on. F1 - Calibration Your MC-2000 is basically ready to use right out of the box. There is no need to calibrate the unit unless you feel the MC-2000 has become inaccurate.
F6 – Average Piece Weight (APW) adjustment If many denominations count high/low, you should re-calibrate the MC-2000 (F1), instead of adjusting individual average piece weights. Factory settings for denomi- nations are as follows. It is extremely unlikely that you will ever need to make any alterations.
With “F9” on display, press TOTAL. Display shows “tA on”. The Factory setting adjusts for the weight of the coin scoop provided with your MC-2000. To adjust for another container, press Enter, display then shows “Zero”. Place empty coins scoop or cup to be used, then press ZERO.
WEIGHT: DISPLAY: Net Weight: 4.0 lb (1.8 kg) 6 Character, 7-Segment LCD Shipping Weight: 5.6 lb (2.5 kg) 9 Annunciators MC-2000 Physical Dimensions: 5.70 in [145mm] 7.87 in [200mm] 2.84 in [72mm] 8.46 in [215mm] 8.47 in [215mm] MC-2000, Version 2.6...
Thirty (30) Day Money Back Guarantee Information Seller guarantees that the MC-2000 Money Counter will conform to written performance specifications. This guarantee is made upon the express condition that: 1) Buyer notifies Seller of such non-conformity with detailed explanation of alleged deficiencies.
Need help?
Do you have a question about the MC-2000 and is the answer not in the manual?
Questions and answers